ADT Security Services BHS-4000A user manual Turn the Door Chime On or Off, View Alarm Memory

Page 28

Turn the Door Chime On or Off

When you turn the door chime on, the keypad beeps if a protected door or window is opened while the system is turned off. To turn the chime on or off:

Standard Keypad

1.Press the OPTIONS key.

2.Press the 2 key. The ENTER CODE light blinks.

3.Enter your keypad code. The keypad beeps. The READY and the CHIME lights turn on while the chime feature is on.

Premium Keypad

1.Press the OPTIONS key until the message window reads DOOR CHIME, ENTER CODE.

2.Enter your keypad code. The keypad beeps. The message window reads

READY, DOOR CHIME.

Note: If you turn the door chime on and the keypad does not beep, the chime feature may have been turned off at installation. To have the feature turned on, please call Customer Care for assistance.

View Alarm Memory

You can use alarm memory to determine which zones have recently been in alarm.

Standard Keypad

1.Press the OPTIONS key.

2.Press the 2 key. The ENTER CODE light blinks.

3.Enter your keypad code. The keypad beeps. The lights of the zones that were last in alarm blink.

Premium Keypad

1.Press the OPTIONS key until the message window reads ALARM

MEMORY, ENTER CODE.

2.Enter your keypad code. The keypad beeps. The message window shows which zones were in alarm.

22

Image 28

Contents System User’s Manual BHS-4000AConsumer Information FCC NoticeIndustry Canada Table of Contents System Testing System OptionsQuestions and Answers Warranty Information Important NoticesWelcome If you have any questions about ADT Security System, visitHow to Avoid False Alarms ADT Home Security System Standard EquipmentStandard Equipment, cont’d Optional Equipment Heat SensorOptional Features Optional Equipment, cont’dKeypad PartsStandard Keypad Premium Keypad Parts of the KeypadStatus Display Standard Keypad Message Window Premium KeypadEmergency Keys Call 911 FirstUsing the Keypad Exit Delay Entry DelayDesignated Doors Turning the System On Four On ModesTurning the System On in Normal Mode Turning the System On in Motion Off ModeTurning the System On in Motion Off/Instant Mode Turning the System On in Instant ModeTurning the System On When It Is Not Ready Standard KeypadBypass Turning the System Off and Canceling an Alarm Turning the System Off When No Alarms Are in ProgressTurning the System Off Turning the System Off Without Canceling an Alarm What to Do in an Actual EmergencyTurning the System Off after an Alarm Occurs in Your Absence System Options Bypass a ZoneView Alarm Memory Turn the Door Chime On or OffCreate an Additional Keypad Code Standard Keypad Premium KeypadDelete a Keypad Code Keypad Code User NumberSystem Testing Siren and Transmission TestTesting All Burglary Sensors Testing the Smoke Detector Testing the Doors and Windows OnlyDoor Chime Testing With Not Ready Zones ReadyUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Problem Indication Communication Radio Problem Indication Optional FeatureLine Cut Indication Optional Feature Upload/Download Failure Smart·Key Wireless Remote Low Battery Optional FeatureZone Trouble Indication Component Failure Indication Call ADT IndicationSiren Failure Indication Keypad Not Working Speaker ClicksCleaning the Smoke Detector If You Trigger an Alarm While Cleaning the DetectorService the Detector Every Two Years Setting the ClockEmergency Evacuation Plans Page Questions and Answers General Use of the SystemSecurity Passwords and Keypad Codes Alarms and Emergencies Emergency ContactsFinancial Questions Repairs and Upgrades Warranty InformationAdditional Questions DSL Service VoIP Service Alarm PermitsImportant Notices UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care