ADT Security Services BHS-4000A Testing the Smoke Detector, Testing the Doors and Windows Only

Page 33

Standard Keypad

7.If you do not hear the siren blast, call ADT at 800.445.0872.

8.When you have finished, press the CANCEL key.

Premium Keypad

6.If you do not hear the siren blast, call ADT at 800.445.0872.

7.When you have finished, press the CANCEL key.

Testing the Smoke Detector

The smoke detector can be tested without sending an alarm signal to ADT. Call ADT Customer Care at 800.445.0872 for assistance. Do not attempt to test the smoke detector with heat, flame or canned smoke, as these methods can damage the smoke detector.

Testing the Doors and Windows Only

This test identifies whether the sensors on your home’s protected doors and windows are operating properly. You may prefer to conduct this test if you find it distracting to hear the siren blast each time you pass the motion detector while testing the system. No alarm signals are sent to ADT’s Customer Monitoring Centers.

To test the system’s door and window sensors, follow the instructions on the next page.

Note: If the system’s chime feature is on, skip steps 2, 3 and 4 of the Standard keypad instructions or steps 2 and 3 of the Premium keypad instructions. When the chime feature is on, the keypad beeps if a protected door or window is opened while the system is off.

27

Image 33
Contents BHS-4000A System User’s ManualFCC Notice Consumer InformationIndustry Canada Table of Contents System Options System TestingWarranty Information Important Notices Questions and AnswersIf you have any questions about ADT Security System, visit WelcomeHow to Avoid False Alarms Standard Equipment ADT Home Security SystemStandard Equipment, cont’d Heat Sensor Optional EquipmentOptional Equipment, cont’d Optional FeaturesParts KeypadStandard Keypad Parts of the Keypad Premium KeypadMessage Window Premium Keypad Status Display Standard KeypadCall 911 First Emergency KeysUsing the Keypad Entry Delay Exit DelayDesignated Doors Four On Modes Turning the System OnTurning the System On in Motion Off Mode Turning the System On in Normal ModeTurning the System On in Instant Mode Turning the System On in Motion Off/Instant ModeStandard Keypad Turning the System On When It Is Not ReadyBypass Turning the System Off When No Alarms Are in Progress Turning the System Off and Canceling an AlarmTurning the System Off What to Do in an Actual Emergency Turning the System Off Without Canceling an AlarmTurning the System Off after an Alarm Occurs in Your Absence Bypass a Zone System OptionsTurn the Door Chime On or Off View Alarm MemoryStandard Keypad Premium Keypad Create an Additional Keypad CodeKeypad Code User Number Delete a Keypad CodeSiren and Transmission Test System TestingTesting All Burglary Sensors Testing the Doors and Windows Only Testing the Smoke DetectorDoor Chime Ready Testing With Not Ready ZonesUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Radio Problem Indication Optional Feature Communication Problem IndicationLine Cut Indication Optional Feature Smart·Key Wireless Remote Low Battery Optional Feature Upload/Download FailureZone Trouble Indication Call ADT Indication Component Failure IndicationSiren Failure Indication Keypad Not Working Speaker ClicksIf You Trigger an Alarm While Cleaning the Detector Cleaning the Smoke DetectorSetting the Clock Service the Detector Every Two YearsEmergency Evacuation Plans Page General Use of the System Questions and AnswersSecurity Passwords and Keypad Codes Emergency Contacts Alarms and EmergenciesFinancial Questions Warranty Information Repairs and UpgradesAdditional Questions VoIP Service Alarm Permits DSL ServiceImportant Notices UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care