ADT Security Services BHS-4000A Turning the System Off after an Alarm Occurs in Your Absence

Page 26

Turning the System Off after an Alarm Occurs in Your Absence

If there was an alarm at your house while you were away and the sirens are no longer sounding:

1. Enter the building through a designated entry door. The ON light blinks. The sirens and speakers are silent. The Premium keypad shows the numbers of the zones in alarm, and its message window reads ALARM.

2. Enter your keypad code to turn the system off. The keypad beeps

CODE

once every three seconds. The keypad shows the numbers of the zones that were in alarm. The Premium keypad reads ALARM MEMORY.

3.Refer to the Pop-Up Zone Card located behind the alarm panel to verify the location of the zones that were in alarm.

4.To silence the keypad’s beeping and clear alarm memory, press the CANCEL key.

5. If you do not know what caused the alarm, review the system’s alarm history at www.MyADT.com or call ADT Customer Care at 800.445.0872.

20

Image 26

Contents System User’s Manual BHS-4000AConsumer Information FCC NoticeIndustry Canada Table of Contents System Testing System OptionsQuestions and Answers Warranty Information Important NoticesWelcome If you have any questions about ADT Security System, visitHow to Avoid False Alarms ADT Home Security System Standard EquipmentStandard Equipment, cont’d Optional Equipment Heat SensorOptional Features Optional Equipment, cont’dStandard Keypad PartsKeypad Premium Keypad Parts of the KeypadStatus Display Standard Keypad Message Window Premium KeypadEmergency Keys Call 911 FirstUsing the Keypad Designated Doors Entry DelayExit Delay Turning the System On Four On ModesTurning the System On in Normal Mode Turning the System On in Motion Off ModeTurning the System On in Motion Off/Instant Mode Turning the System On in Instant ModeTurning the System On When It Is Not Ready Standard KeypadBypass Turning the System Off Turning the System Off When No Alarms Are in ProgressTurning the System Off and Canceling an Alarm Turning the System Off Without Canceling an Alarm What to Do in an Actual EmergencyTurning the System Off after an Alarm Occurs in Your Absence System Options Bypass a ZoneView Alarm Memory Turn the Door Chime On or OffCreate an Additional Keypad Code Standard Keypad Premium KeypadDelete a Keypad Code Keypad Code User NumberSystem Testing Siren and Transmission TestTesting All Burglary Sensors Testing the Smoke Detector Testing the Doors and Windows OnlyDoor Chime Testing With Not Ready Zones ReadyUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Problem Indication Communication Radio Problem Indication Optional FeatureLine Cut Indication Optional Feature Zone Trouble Indication Smart·Key Wireless Remote Low Battery Optional FeatureUpload/Download Failure Siren Failure Indication Component Failure IndicationCall ADT Indication Keypad Not Working Speaker ClicksCleaning the Smoke Detector If You Trigger an Alarm While Cleaning the DetectorEmergency Evacuation Plans Setting the ClockService the Detector Every Two Years Page Questions and Answers General Use of the SystemSecurity Passwords and Keypad Codes Alarms and Emergencies Emergency ContactsFinancial Questions Additional Questions Warranty InformationRepairs and Upgrades Important Notices DSL ServiceVoIP Service Alarm Permits UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care