ADT Security Services BHS-4000A Turning the System On When It Is Not Ready, Standard Keypad

Page 22

Turning the System On When It Is Not Ready

If the system is not ready to turn on, you will get a “not ready” message. This message could mean, for example, that one of the protected windows in your house is open. If you have a Standard keypad, the READY light is off. If you have a Premium keypad, the message window reads NOT READY.

If you press the ON key when the system is not ready to turn on, the keypad sounds an error tone and the system does not turn on.

To make the system ready to arm and turn it on, do the following:

Standard Keypad

1.Press the OPTIONS key.

2.Press the 7 key.

3.Observe which zone light

blinks for the next five seconds. This is the zone that needs to be corrected before the system will turn on. (There may be more than one.)

4. Refer to the Pop-Up Zone Card to verify the zone’s location.

5. If the zone is a door or window, make sure that it is securely closed.

6.If the READY light illuminates, turn the system on.

(continued)

Premium Keypad

1.Observe the number displayed in the message window. This is the zone that needs to be corrected before the system will turn on. (There may be more than one; if so, the numbers are shown one at a time.)

2.Refer to the Pop-Up Zone Card to verify the zone’s location.

3.If the zone is a door or window, make sure that it is securely closed.

4.If the message window reads READY, turn the system on.

16

Image 22

Contents System User’s Manual BHS-4000AConsumer Information FCC NoticeIndustry Canada Table of Contents System Testing System OptionsQuestions and Answers Warranty Information Important NoticesWelcome If you have any questions about ADT Security System, visitHow to Avoid False Alarms ADT Home Security System Standard EquipmentStandard Equipment, cont’d Optional Equipment Heat SensorOptional Features Optional Equipment, cont’dKeypad PartsStandard Keypad Premium Keypad Parts of the KeypadStatus Display Standard Keypad Message Window Premium KeypadEmergency Keys Call 911 FirstUsing the Keypad Exit Delay Entry DelayDesignated Doors Turning the System On Four On ModesTurning the System On in Normal Mode Turning the System On in Motion Off ModeTurning the System On in Motion Off/Instant Mode Turning the System On in Instant ModeTurning the System On When It Is Not Ready Standard KeypadBypass Turning the System Off and Canceling an Alarm Turning the System Off When No Alarms Are in ProgressTurning the System Off Turning the System Off Without Canceling an Alarm What to Do in an Actual EmergencyTurning the System Off after an Alarm Occurs in Your Absence System Options Bypass a ZoneView Alarm Memory Turn the Door Chime On or OffCreate an Additional Keypad Code Standard Keypad Premium KeypadDelete a Keypad Code Keypad Code User NumberSystem Testing Siren and Transmission TestTesting All Burglary Sensors Testing the Smoke Detector Testing the Doors and Windows OnlyDoor Chime Testing With Not Ready Zones ReadyUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Problem Indication Communication Radio Problem Indication Optional FeatureLine Cut Indication Optional Feature Upload/Download Failure Smart·Key Wireless Remote Low Battery Optional FeatureZone Trouble Indication Siren Failure Indication Component Failure IndicationCall ADT Indication Keypad Not Working Speaker ClicksCleaning the Smoke Detector If You Trigger an Alarm While Cleaning the DetectorService the Detector Every Two Years Setting the ClockEmergency Evacuation Plans Page Questions and Answers General Use of the SystemSecurity Passwords and Keypad Codes Alarms and Emergencies Emergency ContactsFinancial Questions Repairs and Upgrades Warranty InformationAdditional Questions Important Notices DSL ServiceVoIP Service Alarm Permits UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care