ADT Security Services BHS-4000A user manual Delete a Keypad Code, Keypad Code User Number

Page 30

Delete a Keypad Code

If you wish to delete a keypad code:

Standard Keypad

Premium Keypad

AUX CODE

KEYPAD CODE

USER NUMBER

1.Press the OPTIONS key.

2.Press the 3 key. The ENTER CODE light blinks.

3.Enter the keypad code. The keypad beeps. The ENTER USER # light blinks.

4.Enter the number of the user whose code you wish to delete. The keypad beeps. The ENTER CODE light blinks.

5.Do not enter the keypad code. Instead, press the CANCEL key. The keypad beeps.

6.Test that the code has been deleted by attempting to turn the system on and off using the deleted code.

AUXILIARY CODES

ENTER KEYPAD

CODE

KEYPAD CODE

USER NUMBER

1.Press the OPTIONS key until the message window reads

AUXILIARY CODES, ENTER KEYPAD CODE.

2.Enter the keypad code. The keypad beeps. The message window reads

ENTER USER #.

3.Enter the number of the user whose code you wish to delete.

The keypad beeps. The window reads

ENTER NEW CODE.

4.Do not enter the keypad code. Instead, press the CANCEL key. The keypad beeps.

5.Test that the code has been deleted by attempting to turn the system on and off using the deleted code.

24

Image 30

Contents System User’s Manual BHS-4000AConsumer Information FCC NoticeIndustry Canada Table of Contents System Testing System OptionsQuestions and Answers Warranty Information Important NoticesWelcome If you have any questions about ADT Security System, visitHow to Avoid False Alarms ADT Home Security System Standard EquipmentStandard Equipment, cont’d Optional Equipment Heat SensorOptional Features Optional Equipment, cont’dParts KeypadStandard Keypad Premium Keypad Parts of the KeypadStatus Display Standard Keypad Message Window Premium KeypadEmergency Keys Call 911 FirstUsing the Keypad Entry Delay Exit DelayDesignated Doors Turning the System On Four On ModesTurning the System On in Normal Mode Turning the System On in Motion Off ModeTurning the System On in Motion Off/Instant Mode Turning the System On in Instant ModeTurning the System On When It Is Not Ready Standard KeypadBypass Turning the System Off When No Alarms Are in Progress Turning the System Off and Canceling an AlarmTurning the System Off Turning the System Off Without Canceling an Alarm What to Do in an Actual EmergencyTurning the System Off after an Alarm Occurs in Your Absence System Options Bypass a ZoneView Alarm Memory Turn the Door Chime On or OffCreate an Additional Keypad Code Standard Keypad Premium KeypadDelete a Keypad Code Keypad Code User NumberSystem Testing Siren and Transmission TestTesting All Burglary Sensors Testing the Smoke Detector Testing the Doors and Windows OnlyDoor Chime Testing With Not Ready Zones ReadyUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Problem Indication Communication Radio Problem Indication Optional FeatureLine Cut Indication Optional Feature Smart·Key Wireless Remote Low Battery Optional Feature Upload/Download FailureZone Trouble Indication Siren Failure Indication Component Failure IndicationCall ADT Indication Keypad Not Working Speaker ClicksCleaning the Smoke Detector If You Trigger an Alarm While Cleaning the DetectorSetting the Clock Service the Detector Every Two YearsEmergency Evacuation Plans Page Questions and Answers General Use of the SystemSecurity Passwords and Keypad Codes Alarms and Emergencies Emergency ContactsFinancial Questions Warranty Information Repairs and UpgradesAdditional Questions Important Notices DSL ServiceVoIP Service Alarm Permits UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care