ADT Security Services BHS-4000A user manual Turning the System Off

Page 24

Turning the System Off

Turning the System Off When No Alarms Are in Progress

CODE

1.Enter through a designated entry door. The keypad sounds a tone to remind you to turn the system off. The ON light blinks.

2.Turn the system off by entering your keypad code.

To prevent an alarm, you must enter your code before the entry delay ends. See page 12 to reference the Entry Delay Time programmed in your system.

Once the system is off, the ON light goes out.

Turning the System Off and Canceling an Alarm

Should you cause an alarm accidentally:

CODE

1.Enter through a designated entry door. The siren sounds, and the ON light blinks. The Premium keypad’s message window reads ALARM. The Standard keypad’s ON light blinks.

2.Enter your keypad code. The Premium keypad’s message window reads ALARM MEMORY.

3.Press the CANCEL key (you must press the CANCEL key within 20 seconds of entering your code). The keypad beeps.

You will not receive a call from ADT. The Premium keypad’s message window reads ALARM CANCELED.

Note: If you press the CANCEL key before entering your code, the result is the same.

18

Image 24

Contents System User’s Manual BHS-4000AConsumer Information FCC NoticeIndustry Canada Table of Contents System Testing System OptionsQuestions and Answers Warranty Information Important NoticesWelcome If you have any questions about ADT Security System, visitHow to Avoid False Alarms ADT Home Security System Standard EquipmentStandard Equipment, cont’d Optional Equipment Heat SensorOptional Features Optional Equipment, cont’dParts KeypadStandard Keypad Premium Keypad Parts of the KeypadStatus Display Standard Keypad Message Window Premium KeypadEmergency Keys Call 911 FirstUsing the Keypad Entry Delay Exit DelayDesignated Doors Turning the System On Four On ModesTurning the System On in Normal Mode Turning the System On in Motion Off ModeTurning the System On in Motion Off/Instant Mode Turning the System On in Instant ModeTurning the System On When It Is Not Ready Standard KeypadBypass Turning the System Off When No Alarms Are in Progress Turning the System Off and Canceling an AlarmTurning the System Off Turning the System Off Without Canceling an Alarm What to Do in an Actual EmergencyTurning the System Off after an Alarm Occurs in Your Absence System Options Bypass a ZoneView Alarm Memory Turn the Door Chime On or OffCreate an Additional Keypad Code Standard Keypad Premium KeypadDelete a Keypad Code Keypad Code User NumberSystem Testing Siren and Transmission TestTesting All Burglary Sensors Testing the Smoke Detector Testing the Doors and Windows OnlyDoor Chime Testing With Not Ready Zones ReadyUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Problem Indication Communication Radio Problem Indication Optional FeatureLine Cut Indication Optional Feature Smart·Key Wireless Remote Low Battery Optional Feature Upload/Download FailureZone Trouble Indication Component Failure Indication Call ADT IndicationSiren Failure Indication Keypad Not Working Speaker ClicksCleaning the Smoke Detector If You Trigger an Alarm While Cleaning the DetectorSetting the Clock Service the Detector Every Two YearsEmergency Evacuation Plans Page Questions and Answers General Use of the SystemSecurity Passwords and Keypad Codes Alarms and Emergencies Emergency ContactsFinancial Questions Warranty Information Repairs and UpgradesAdditional Questions DSL Service VoIP Service Alarm PermitsImportant Notices UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care