ADT Security Services BHS-4000A user manual Turning the System On in Motion Off/Instant Mode

Page 21

Turning the System On in Motion Off/Instant Mode

MOTION

OFF

INSTANT

1.Close all of the doors and windows, and make sure that the message window reads READY or the READY light is lit (if not, see page 16).

2.Press the ON key.

3.Press the MOTION OFF key.

4.Press the INSTANT key.

The ON light turns on. The Premium keypad reads ON, MOTION OFF and INSTANT. The Standard keypad’s ON, MOTION OFF and INSTANT lights are lit.

Do not leave the building or open any protected windows without first turning the system off.

Turning the System On in Instant Mode

INSTANT

1.Close all of the doors and windows, and make sure that the message window reads READY or the READY light is lit (if not, see page 16).

2.Press the ON key.

3.Press the INSTANT key.

The ON light turns on. The Premium keypad reads ALL ON, INSTANT. On the Standard keypad , the INSTANT light turns on.

Do not leave the building, open any protected windows or move in front of the motion detector without first turning the system off.

15

Image 21

Contents BHS-4000A System User’s ManualFCC Notice Consumer InformationIndustry Canada Table of Contents System Options System TestingWarranty Information Important Notices Questions and AnswersIf you have any questions about ADT Security System, visit WelcomeHow to Avoid False Alarms Standard Equipment ADT Home Security SystemStandard Equipment, cont’d Heat Sensor Optional EquipmentOptional Equipment, cont’d Optional FeaturesParts KeypadStandard Keypad Parts of the Keypad Premium KeypadMessage Window Premium Keypad Status Display Standard KeypadCall 911 First Emergency KeysUsing the Keypad Entry Delay Exit DelayDesignated Doors Four On Modes Turning the System OnTurning the System On in Motion Off Mode Turning the System On in Normal ModeTurning the System On in Instant Mode Turning the System On in Motion Off/Instant ModeStandard Keypad Turning the System On When It Is Not ReadyBypass Turning the System Off When No Alarms Are in Progress Turning the System Off and Canceling an AlarmTurning the System Off What to Do in an Actual Emergency Turning the System Off Without Canceling an AlarmTurning the System Off after an Alarm Occurs in Your Absence Bypass a Zone System OptionsTurn the Door Chime On or Off View Alarm MemoryStandard Keypad Premium Keypad Create an Additional Keypad CodeKeypad Code User Number Delete a Keypad CodeSiren and Transmission Test System TestingTesting All Burglary Sensors Testing the Doors and Windows Only Testing the Smoke DetectorDoor Chime Ready Testing With Not Ready ZonesUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Radio Problem Indication Optional Feature Communication Problem IndicationLine Cut Indication Optional Feature Smart·Key Wireless Remote Low Battery Optional Feature Upload/Download FailureZone Trouble Indication Call ADT Indication Component Failure IndicationSiren Failure Indication Keypad Not Working Speaker ClicksIf You Trigger an Alarm While Cleaning the Detector Cleaning the Smoke DetectorSetting the Clock Service the Detector Every Two YearsEmergency Evacuation Plans Page General Use of the System Questions and AnswersSecurity Passwords and Keypad Codes Emergency Contacts Alarms and EmergenciesFinancial Questions Warranty Information Repairs and UpgradesAdditional Questions VoIP Service Alarm Permits DSL ServiceImportant Notices UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care