ADT Security Services BHS-4000A user manual Alarms and Emergencies, Emergency Contacts

Page 49

Alarms and Emergencies

1.If there is an alarm, does the system reset?

Yes. As long as there are no additional alarms after the system stops sounding, the system resets itself approxi- mately five minutes later. However, if a fire alarm is activated, the siren will sound continuously until you enter your keypad code.

2.What happens if my telephone line is cut?

If you purchased the optional Line Cut feature, the siren sounds or the keypad beeps within about a minute of the time the line was cut. The system can still sound an audible alarm, but ADT’s Customer Monitoring Centers will not receive an alarm signal until the line is restored.

You can also equip the system with an optional backup device designed to send a signal if your telephone service is interrupted. Contact ADT Customer Care at 800.445.0872 for more information.

3.If the power goes out at my house, will the alarm system still work?

Yes. The system has a battery that can provide backup power for up to four hours. Once the electrical power to your home is restored, the battery will recharge automatically. Like all batteries, this battery will eventually need to be replaced. The system battery has a one-year warranty. You may replace the battery yourself or have ADT schedule a service call. For battery replacement instructions, visit www.MyADT.com or call ADT Customer Care at 800.445.0872.

Emergency Contacts

1.Whom should I list as an Emergency Contact?

You should list people who live fairly close to you, and who usually know where you are and how to contact you. Ideally, at least one of your contacts should have keys to your house and permission to authorize service in your absence. You can change your list of Emergency Contacts online at www.MyADT.com, or by calling Customer Care at 800.445.0872.

2.What should I tell my Emergency Contacts?

First of all, be sure to tell them that they are one of your Emergency Contacts. Tell them that, after the emergency agencies are notified, ADT may attempt to reach them when there is an alarm at your house. Discuss the actions that you would like them to take if this happens. You should also tell your Emergency Contacts if they have your permission to authorize service of the system in your absence.

On occasion, representatives of an emergency agency may ask your Emergency Contact to meet them at the house with the house keys. Emergency Contacts, however, should never attempt to investigate an alarm independent of the authorities.

3.How do I change my Emergency Contacts?

Log in to www.MyADT.com and go to the My Alarm tab, or call ADT Customer Care. Be prepared to provide your Security Password and the updated information.

43

Image 49
Contents BHS-4000A System User’s ManualFCC Notice Consumer InformationIndustry Canada Table of Contents System Options System TestingWarranty Information Important Notices Questions and AnswersIf you have any questions about ADT Security System, visit WelcomeHow to Avoid False Alarms Standard Equipment ADT Home Security SystemStandard Equipment, cont’d Heat Sensor Optional EquipmentOptional Equipment, cont’d Optional FeaturesKeypad PartsStandard Keypad Parts of the Keypad Premium KeypadMessage Window Premium Keypad Status Display Standard KeypadCall 911 First Emergency KeysUsing the Keypad Exit Delay Entry DelayDesignated Doors Four On Modes Turning the System OnTurning the System On in Motion Off Mode Turning the System On in Normal ModeTurning the System On in Instant Mode Turning the System On in Motion Off/Instant ModeStandard Keypad Turning the System On When It Is Not ReadyBypass Turning the System Off and Canceling an Alarm Turning the System Off When No Alarms Are in ProgressTurning the System Off What to Do in an Actual Emergency Turning the System Off Without Canceling an AlarmTurning the System Off after an Alarm Occurs in Your Absence Bypass a Zone System OptionsTurn the Door Chime On or Off View Alarm MemoryStandard Keypad Premium Keypad Create an Additional Keypad CodeKeypad Code User Number Delete a Keypad CodeSiren and Transmission Test System TestingTesting All Burglary Sensors Testing the Doors and Windows Only Testing the Smoke DetectorDoor Chime Ready Testing With Not Ready ZonesUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Radio Problem Indication Optional Feature Communication Problem IndicationLine Cut Indication Optional Feature Upload/Download Failure Smart·Key Wireless Remote Low Battery Optional FeatureZone Trouble Indication Call ADT Indication Component Failure IndicationSiren Failure Indication Keypad Not Working Speaker ClicksIf You Trigger an Alarm While Cleaning the Detector Cleaning the Smoke DetectorService the Detector Every Two Years Setting the ClockEmergency Evacuation Plans Page General Use of the System Questions and AnswersSecurity Passwords and Keypad Codes Emergency Contacts Alarms and EmergenciesFinancial Questions Repairs and Upgrades Warranty InformationAdditional Questions VoIP Service Alarm Permits DSL ServiceImportant Notices UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care