ADT Security Services BHS-4000A user manual Consumer Information, FCC Notice

Page 2

Consumer Information

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If interference generated by this unit is suspected, call ADT Customer Care at 800.445.0872.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient the TV/radio antenna.

Move the television or receiver away from the unit.

Plug the unit and the TV/radio receiver into different outlets, i.e., not on the same circuit breaker.

Contact ADT Security Services or an experienced TV/radio technician for additional suggestions.

This equipment complies with FCC Rules, Part 68.

On the outside of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your telephone company.

This equipment is equipped with a USOC RJ31X connector. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack (RJ31X) that is Part 68 compliant.

The REN is used to determine the quantity of devices you may connect to your telephone line and still have all devices ring when your number is called. In most but not all areas, the sum of the RENs of all devices should not exceed five. To be certain of the maximum number of devices you may connect to your line as determined by the REN, you should call your local telephone company.

Should you experience trouble with the telephone lines, disconnect the equipment from the line to determine the source of the trouble. If it is determined that the equipment is malfunctioning, discontinue its use until the malfunction has been corrected. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telephone company cause to request the user to disconnect the equipment. If you experience trouble with this equipment, please contact ADT Customer Care at 800.445.0872 for information on obtaining service or repairs, or visit the Frequently Asked Questions section of www.MyADT.com.

Should this equipment cause harm to the telephone network, the telephone company may temporarily discontinue your service. If possible, they will provide you with advance notice. Otherwise they will notify you as soon as possible. The telephone company will also advise you of changes in its facilities, equipment, operations or procedures that could affect the operation of your equipment, allowing you the opportunity to maintain uninterrupted service. You will also be advised of your right to file acomplaint with the FCC.

This equipment must not be used on party lines or coin-operated phone lines. FCC Registration: C2D MUL-35516-AL-E

Ringer Equivalence Number: 0.5B

ii

Image 2
Contents System User’s Manual BHS-4000AConsumer Information FCC NoticeIndustry Canada Table of Contents System Testing System OptionsQuestions and Answers Warranty Information Important NoticesWelcome If you have any questions about ADT Security System, visitHow to Avoid False Alarms ADT Home Security System Standard EquipmentStandard Equipment, cont’d Optional Equipment Heat SensorOptional Features Optional Equipment, cont’dStandard Keypad PartsKeypad Premium Keypad Parts of the KeypadStatus Display Standard Keypad Message Window Premium KeypadEmergency Keys Call 911 FirstUsing the Keypad Designated Doors Entry DelayExit Delay Turning the System On Four On ModesTurning the System On in Normal Mode Turning the System On in Motion Off ModeTurning the System On in Motion Off/Instant Mode Turning the System On in Instant ModeTurning the System On When It Is Not Ready Standard KeypadBypass Turning the System Off Turning the System Off When No Alarms Are in ProgressTurning the System Off and Canceling an Alarm Turning the System Off Without Canceling an Alarm What to Do in an Actual EmergencyTurning the System Off after an Alarm Occurs in Your Absence System Options Bypass a ZoneView Alarm Memory Turn the Door Chime On or OffCreate an Additional Keypad Code Standard Keypad Premium KeypadDelete a Keypad Code Keypad Code User NumberSystem Testing Siren and Transmission TestTesting All Burglary Sensors Testing the Smoke Detector Testing the Doors and Windows OnlyDoor Chime Testing With Not Ready Zones ReadyUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Problem Indication Communication Radio Problem Indication Optional FeatureLine Cut Indication Optional Feature Zone Trouble Indication Smart·Key Wireless Remote Low Battery Optional FeatureUpload/Download Failure Siren Failure Indication Component Failure IndicationCall ADT Indication Keypad Not Working Speaker ClicksCleaning the Smoke Detector If You Trigger an Alarm While Cleaning the DetectorEmergency Evacuation Plans Setting the ClockService the Detector Every Two Years Page Questions and Answers General Use of the SystemSecurity Passwords and Keypad Codes Alarms and Emergencies Emergency ContactsFinancial Questions Additional Questions Warranty InformationRepairs and Upgrades Important Notices DSL ServiceVoIP Service Alarm Permits UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care