ADT Security Services BHS-4000A user manual Bypass

Page 23

Standard Keypad

7.If the READY light does not turn on, see the Frequently Asked Questions at www.MyADT.com, or call Customer Care at 800.445.0872 for further assistance in correcting the not-ready condition.

8.To turn the system on, you must first turn off the zone that is not ready to arm. Press the OPTIONS key.

9.Press the 1 key.

BYPASS

10.Enter the number of the not-ready zone, which is the number of the illuminated light you observed in step 3.

ZONE

NUMBER CAUTION: If you bypass a zone, it will not be protected.

The keypad beeps. The READY and BYPASS lights turn on.

11. Turn the system on.

Premium Keypad

5.If the message window reads NOT READY, see the Frequently Asked Questions at www.MyADT.com, or call Customer Care at 800.445.0872 for further assistance in correcting the not-ready condition.

6.To turn the system on, you must first turn off the zone that is not ready to arm.

Press the OPTIONS key until the message window reads:

BYPASS, ENTER ZONE #.

7.Enter the number of the not- ready zone, which is the same number that appeared in the message window.

ZONE

NUMBER CAUTION: If you bypass a zone, it will not be protected.

The keypad beeps. The message window reads READY, BYPASS, and the number of the bypassed zone is momentarily displayed.

8. Turn the system on.

17

Image 23

Contents BHS-4000A System User’s ManualFCC Notice Consumer InformationIndustry Canada Table of Contents System Options System TestingWarranty Information Important Notices Questions and AnswersIf you have any questions about ADT Security System, visit WelcomeHow to Avoid False Alarms Standard Equipment ADT Home Security SystemStandard Equipment, cont’d Heat Sensor Optional EquipmentOptional Equipment, cont’d Optional FeaturesStandard Keypad PartsKeypad Parts of the Keypad Premium KeypadMessage Window Premium Keypad Status Display Standard KeypadCall 911 First Emergency KeysUsing the Keypad Designated Doors Entry DelayExit Delay Four On Modes Turning the System OnTurning the System On in Motion Off Mode Turning the System On in Normal ModeTurning the System On in Instant Mode Turning the System On in Motion Off/Instant ModeStandard Keypad Turning the System On When It Is Not ReadyBypass Turning the System Off Turning the System Off When No Alarms Are in ProgressTurning the System Off and Canceling an Alarm What to Do in an Actual Emergency Turning the System Off Without Canceling an AlarmTurning the System Off after an Alarm Occurs in Your Absence Bypass a Zone System OptionsTurn the Door Chime On or Off View Alarm MemoryStandard Keypad Premium Keypad Create an Additional Keypad CodeKeypad Code User Number Delete a Keypad CodeSiren and Transmission Test System TestingTesting All Burglary Sensors Testing the Doors and Windows Only Testing the Smoke DetectorDoor Chime Ready Testing With Not Ready ZonesUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Radio Problem Indication Optional Feature Communication Problem IndicationLine Cut Indication Optional Feature Zone Trouble Indication Smart·Key Wireless Remote Low Battery Optional FeatureUpload/Download Failure Keypad Not Working Speaker Clicks Component Failure IndicationCall ADT Indication Siren Failure IndicationIf You Trigger an Alarm While Cleaning the Detector Cleaning the Smoke DetectorEmergency Evacuation Plans Setting the ClockService the Detector Every Two Years Page General Use of the System Questions and AnswersSecurity Passwords and Keypad Codes Emergency Contacts Alarms and EmergenciesFinancial Questions Additional Questions Warranty InformationRepairs and Upgrades UL Information DSL ServiceVoIP Service Alarm Permits Important NoticesPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care