Keypad Codes
When the system is installed, you select a three- or
You can also create a separate keypad code for anyone who needs access to your home (see page 23 for more information). You can change your keypad code and add or delete additional codes whenever you like, using the keypad.
If you have questions about programming, using or changing your keypad code, you can contact ADT’s Customer Care team at CustomerCare@adt.com.
Entering and Exiting
Designated Doors
The designated entry/exit doors are those doors that you must use to enter and leave your home while the system is on. These doors may be equipped with the door sensors described on page 3. If you use a different door to enter your home, an alarm may sound.
Entry Delay
When you enter your home while the security system is on, the keypad beeps. This beeping reminds you to turn the system off. You must enter your keypad code before the beeping stops. If you do not, an alarm is triggered.
Entry Delay Time:
Exit Delay
When you turn the system on in normal mode, you must exit the building and close the door before the exit delay ends. Once that delay has ended, you will trigger an alarm if you open a protected door or window, or move past a motion detector.
Exit Delay Time:
Note: The length of the system’s entry and exit delays can be adjusted (within certain limits). If you find it difficult to enter or exit your home before the delay ends, contact ADT Customer Care at 800.445.0872 to have it changed.
12