Standard Keypad
1. Close all doors and win- dows.Make sure that the READY light is on. (If it is not, see page 29.)
2.Press the OPTIONS key.
3.Press the 2 key.
4.Enter your keypad code. The READY and the CHIME lights turn on.
5. Open each protected door and window. Listen for the keypad to beep*.
6. If you do not hear the keypad beep, note the zone number and call Customer Care at 800.445.0872.
7.When you have finished testing, end the test by repeating steps 2, 3 and 4.
Premium Keypad
1. Close all doors and windows. Make sure the message window reads READY. (If it does not, see page 29.)
2.Press the OPTIONS key until the message window reads
DOOR CHIME.
3.Enter your keypad code. The message window reads
READY DOOR CHIME.
4. Open each protected door and window. Listen for the keypad to beep*.
5. If you do not hear the keypad beep, note the zone number and call Customer Care at 800.445.0872.
6.When you have finished testing, end the test by repeating steps 2 and 3.
*Note: The keypad does not beep if the chime feature has been turned off by the installer.
28