Heat & Glo LifeStyle ESCAPE-I35-C owner manual Ember Placement, Placement of Embers Escape-I30-C

G. Ember Placement

WARNING! Risk of Explosion! Follow ember placement instructions in manual. DO NOT place embers directly over burner ports. Replace ember material annually. Improperly placed embers interfere with proper burner operation.

Ember material is shipped with this gas appliance. To place the ember material:

•Embers CANNOT be placed directly over ports. Care should be taken not to cover the lighting trail of ports (from back to front).

•Place dime-size pieces of Glowing Embers® just in front of the port trail, but not on or in between the ports. See Figure 12.2 (Escape-I30-C) or Figure 12.3 (Escape- I35-C). Care should be taken so that the ports are not covered. Failure to follow this procedure will likely cause lighting and sooting problems.

•Save the remaining ember materials for use during appliance servicing. The embers provided should be enough for 3 to 5 applications.

EMBERS NOT

ALLOWED IN

PILOT AREA

Figure 12.2 Placement of Embers (Escape-I30-C)

EMBERS NOT

ALLOWED IN

PILOT AREA

Figure 12.3 Placement of Embers (Escape-I35-C)

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev. H • 5/12 33