LOG MATES WITH CORNER OF BURNER
2
LOG HANGS OVER
ONTO BURNER TOP
Figure 4. Log #2
Log #2 (SRV2202-701): See Figure 2 for additional references. Position Log #2 as shown in Figure 4. Mate Log #2 with the right corner of the burner as shown. Pull the log forward and to the left until it locks into position.
LOG CONTACTS LEFT GRATE TINE
3
LOG CONTACTS RIGHT GRATE TINE
4
Figure 5. Log #3 | Figure 6. Log #4 |
Log #3 (SRV2202-704): See Figure 2 for additional reference details. Locate the log slot on the bottom right end of Log #3. Mate the log slot with the left log pin. Rotate the left end of the log counterclockwise, until it contacts the grate tine. Log #4 (SRV2202-703): See Figure 2 for additional reference details. Locate the log slot on the bottom left end of log #4. Mate the log slot with the right log pin. Rotate the right end of the log clockwise, until it contacts the grate tine.
GLASS ROCK
Figure 7. Glass Rock in Place
Glass Rock (2201-853):Once Log #3 and Log #4 are installed, fill each light tray with the glass rock.
WARNING! Risk of Explosion! DO NOT place glass rock on the burner surface. DO NOT place glass rock directly over burner ports. Improperly placed glass rock interferes with proper burner operation.
38 | Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev. H • 5/12 |
