Heat & Glo LifeStyle 6000GCF-IPILP owner manual H1 Maximum V1 + Minimum

2.Top Vent - Vertical Termination

No Elbow

V1

Figure 5.6

V1 = 50 ft. Max. (15.2 m) V1 = 3 ft. Min. (914mm)

NOTE: If installing a vertical vent/ termination off the top of the appli- ance, the flue restrictor should be used. See Section 7.D.

Two Elbows

	V1	H1 Maximum		V2	V1 + V2	Minimum
6 in.	152 mm	3 ft	914 mm	*	*		*
1 ft	305 mm	3 ft	914 mm	*	*		*
2 ft	607 mm	6 ft	1.8 m	*	*		*
4 ft	1.2 m	12 ft	3.7 m	*	*		*

V1 + V2 + H1 = 50 ft (15.2 m) Max.

*No specific restrictions on this value EXCEPT

V1 + V2 + H1 cannot exceed 50 ft (15.2 m)

V1 = 6 inches (152 mm) Min.

Figure 5.7

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. F • 6/08 15