Chateau™ Direct Vent Gas Fireplace
Trim Installation
CAUTION: Allow fireplace to cool if it has been in operation.
Trim components: 2 each, top frame assembly, bottom trim assembly, right and left trim assem- blies.
NOTE: Only one trim set is used when Vista Door is installed.
NOTE: Place trim pieces with magnets facing window frame.
1. Place bottom trim on the bottom of the window frame. NOTE: Final adjustments will be made once all trim pieces are in place.
2. The right and left trim piece have a 45° notch on the back corner of the top end. (Fig. 53) Place the right trim against the right side of the window frame, making sure the bottom is over- lapping the bottom trim piece. The right side of the trim should butt up against the right side nailing flange of the fireplace.
3. Place the left trim on the left side of the window frame as in Step 2.
4. Place the top trim piece so the ends overlap both the right and left side trim pieces.
5. | Adjust the top trim so the top butts up against |
| the top nailing flange and the sides are butted |
| up against the side nailing flanges and the top Fig. 54 Trim frame in place. |
| trim. Once the top trims are in place, move the |
| bottom trim up until it fits securely with the bottom of |
| the side trims. |
6. | Repeat steps for other side of fireplace. |
| Left and Right Trim, |
| 45° Notch on Top End |
KT601
Fig. 53 The right and left trim pieces have a 45° notch on the back corner of the top end when properly installed.
Nailing
Flange
Trim
FP1814
34 | 20011957 |