Quick Reference ( Auto-Light )
1 Turn Mode Selector to OFF.
2Scrape the air holes in the burnpot.**
3 Fill the hopper with pellets.
4 Turn Feed Adjuster to “Test”.*
5 Check the Combustion Blower and Feeder Motor for operation.* 6 Turn Feed Adjuster back to the #4, or previously known setting. 7 Turn the MAX TEMP dial to the desired temperature.
8 Turn MIN TEMP dial to the desired settings.* 9 Flip the igniter switch to Auto.*
The boiler will ignite if the temperature of the boiler water is less than the temperature set on MAX TEMP dial..
*See the section on Operation for information about Manual Lighting and Emergency Power.
**See the section on Maintenance for more details about cleaning.