Bryant 580J manual FACTORY-INSTALLED Options and FIELD-INSTALLED Accessories, Condenser Protection

Table 1 – FACTORY-INSTALLED OPTIONS AND FIELD-INSTALLED ACCESSORIES

CATEGORY	ITEM	FACTORY	FIELD
		INSTALLED	INSTALLED
		OPTION	ACCESSORY
Cabinet	Thru---the---base electrical or gas---line connections	X	X
	Cu/Cu indoor and/or outdoor coils1	X
Coil Options	Pre---coated outdoor coils1	X
	Premium, E ---coated outdoor coils1	X
Humidity Control	Perfect Humidity Dehumidification System (3 --- 12.5T)	X
Condenser Protection	Condenser coil hail guard (louvered design)	X	X
	Thermostats, temperature sensors, and subbases		X
	RTU---MP open---protocol controller	X
Controls
	Smoke detector (supply and/or return air)	X
	Time Guard II compressor delay control circuit		X
	Phase Monitor		X
	EconoMi$ert IV (for electro---mechanical controlled RTUs)	X	X
Economizers	EconoMi$ert2 (for DDC controlled RTUs)	X	X
& Outdoor Air	Motorized 2 position outdoor air damper	X	X
Dampers	Manual outdoor air damper (25% and 50%)		X
	Barometric relief2	X	X
	Power exhaust		X
	Single dry bulb temperature sensors3	X	X
Economizer Sensors	Differential dry bulb temperature sensors3		X
	Single enthalpy sensors3	X	X
&
	Differential enthalpy sensors3		X
IAQ Devices
	Wall or duct mounted CO2 sensor3		X
	Unit mounted CO2 sensor3	X
	Propane conversion kit		X
	Stainless steel heat exchanger	X
Gas Heat
	High altitude conversion kit		X
	Flue Shield		X
	Flue Discharge Deflector		X
Indoor Motor & Drive	Multiple motor and drive packages	X
Low Ambient	Winter start kit4		X
Control	Motormaster head pressure controller4		X
Power	Convenience outlet (powered)	X
	Convenience outlet (un---powered)	X
Options
	Non---fused disconnect	X
Roof Curbs	Roof curb 14---in (356mm)		X
	Roof curb 24---in (610mm)		X

NOTES:

1.Novation coated coils only available with E ---coat.

2.Included with economizer.

3.Sensors used to optimize economizer performance.

4.See application data for assistance.

580J

5