Singer XL-400 Functions Of Operation Switch Panel, Tacking Stitch Mode Button, Start/Stop Button

FUNCTIONS OF OPERATION SWITCH PANEL

1. TACKING STITCH MODE BUTTON

Push this button and tacking stitch can be done with LED lit. The sewing machine makes 4 tiny tacking stitches to tie off the sewing on all patterns. The position of the tacking stitches will be at the exact spot in the pattern where the tacking stitch button is pushed.

2. NEEDLE STOP POSITION SELECTOR BUTTON

When the machine is turned on, needle is set at its up-stop position with upper LED lamp lit. When the button is pushed, needle is set at its down-stop position with lower LED lamp lit. Push it again and it will return to its up-stop position with upper LED lamp lit.

3. REVERSE STITCH BUTTON

Reverse sewing is carried out by pushing the reverse stitch button. The machine will sew 4 stitches in reverse and stop.

4. START/STOP BUTTON

When the Start/Stop button is pushed, the machine starts slowly, and when the button is pushed once more, the machine stops.

However, when foot control is plugged, the Start/Stop button will be inactive.

5. LED INDICATOR

Green light indicates machine is ready to start.

Red light indicates machine is operating.

Flashing red light indicates a problem or an error.

* Flashing for 2 - 3 seconds shows that an incorrect operation was made.

* Continuous flashing indicates that the machine malfunctions.

6. SPEED CONTROL LEVER

Sliding the lever sets desired sewing speed. When foot control is used, the lever serves as a top speed limiter.

1

2

3

4

5

Reverse stitch function for straight and zigzag

stitches

Fonction couture arrière pour les points droits et zigzags

Función de costura hacia atrás para costuras rectas y zigzag

Tacking stitch function for tie-off of other

stitches

Fonction de point de faufilage pour la jonction avec d’autres points

Función de remate para terminación de otras puntadas.

6

28