ZIGZAG STITCHING
SETTINGS :Presser foot - General Purpose Foot :Thread tension control - S
The top thread may appear on the bottom depending on the thread, fabric, type of stitch and sewing speed, but the bobbin thread must never appear on the top of the fabric.
Under side
Côté de dessous Reverso
Top side 
Côté de dessus Cara
ADJUSTING STITCH WIDTH AND LENGTH
is values set automatically when pattern (No. 03) is set. The stitch length is 2 mm and the stitch width is about 5 mm.
is the selection range when setting the value manually.
SATIN STITCH
This is a closely spaced stitch used for appliqué,
Use a backing of stabilizer to help avoid stitches puckering the fabric.
PLACEMENT OF PATTERNS
Stitch width of pattern increases from center needle position as illustrated.
|
|
| STITCH WIDTH |
|
|
| LARGEUR DU POINT |
|
|
| ANCHO PUNTADA |
| mm | 0 | 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 |
| 0 |
|
|
| 0.3 |
|
|
STITCH LENGTH LONGUEUR DU POINT LARGO PUNTADA | 0.5 |
|
|
0.8 |
|
| |
1.0 |
|
| |
1.3 |
|
| |
1.5 |
|
| |
1.8 |
|
| |
2.0 |
|
| |
2.5 |
|
| |
| 3.0 |
|
|
Center position
Position centrale
Aguja posicionada en el centro
36