5. PERFORMANCE CHECKLIST
GENERAL PROBLEMS
Machine does not sew.
*Power switch is turned off.- Turn on the switch. Machine jams/knocks.
*Thread is caught in hook.- Clean hook (see page 74 - 75).
*Needle is damaged.- Replace needle (see page 26 - 27). Fabric does not move.
*Presser foot is not lowered - lower presser foot.
*Feed dog control is lowered (see page 16 - 17).
STITCHING PROBLEMS
Machine skips stitches.
*Needle is not all the way up into needle clamp. - See page 26 - 27.
*Needle is bent or blunt. - Replace needle (see page 26 - 27).
*Machine is not threaded correctly. - See page 20 - 21.
*Thread is caught in hook. - Clean hook (see page 74 - 75). Stitches are irregular.
*Needle size is not correct for thread and fabric. - See page 26
-27.
*Machine is not threaded correctly. - See page 20 - 21.
*Top thread tension is too loose. - See page 28 - 29.
*Fabric is being pulled or pushed against machine feeding action. - Guide it gently.
*Bobbin has not been wound evenly. - Rewind bobbin. Needle breaks.
*Fabric is being pulled or pushed against machine feeding action. - Guide it gently.
*Needle size is not correct for thread and fabric. - See page 26
-27.
*Needle is not all the way up into the needle clamp. - See page 26 - 27.
THREAD PROBLEMS
Thread bunches.
* Top and bobbin threads are not drawn back under presser foot before starting seam. - Draw both threads back under presser foot about 4 inches (10 cm) and hold until a few stitches are formed.
Needle thread breaks.
*Machine is not threaded correctly. - See page 20 - 21.
*Top thread tension is too tight. - See page 28 - 29.
*Needle is bent. - Replace needle (see page 26 - 27).
*Needle size is not correct for thread and fabric - See page 26 - 27.
Bobbin thread breaks.
*Bobbin case is not threaded correctly. - See page 18 - 19.
*Lint accumulates in bobbin case or hook. - Remove lint
(see page 74 - 75). Fabric puckers.
*Top thread tension is too tight. - Adjust thread tension (see page 28 - 29).
*Stitch length is too long for sheer or soft fabric. - Shorten stitch length.
80