MULTI-STITCH ZIGZAG
SETTINGS :Presser foot - General Purpose Foot :Thread tension control - AUTO
This is a strong stitch because as its name implies, it makes three short stitches where the normal
For this reason it is highly recommended for overcasting all types of fabrics.
It is also ideal for bartacks, mending tears, patching, sewing towelling,
NOTE: Mending a tear or overedging as shown in illustration requires manual adjustment of the length control.
SHELL STITCH
SETTINGS :Presser foot - General Purpose Foot :Thread tension control - AUTO
Turn under the raw edge and press. Place the fabric right side up so that the zigzag part of the stitch sews just over the folded edge, pulling the fabric in to form a shell hem. Trim away excess fabric close to the stitching line.
Helpful Hint: For a pleasing appearance experiment with different width, length and tension settings.
50