Craftsman 139.53993D owner manual Operation, Using Your Garage Door Opener

Page 30

OPERATION

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of SEVERE INJURY or DEATH:

1.READAND FOLLOWALL WARNINGSAND INSTRUCTIONS.

2.ALWAYSkeep remote controls out of reach of children. NEVERpermit children to operate or play with garage door control push buttons or remote controls.

3.ONLYactivate garage door when it can be seen clearly, it is properly adjusted, and there are no obstructions to door travel.

4.ALWAYSkeep garage door in sight until completely closed.

NOONESHOULDCROSSTHE PATHOFTHE MOVING DOOR.

5.NOONESHOULDGOUNDERA STOPPED,PARTIALLY OPENEDDOOR.

6.If possible, use emergency release handleto disengage trolley ONLYwhen garagedoor is CLOSED.Weak or broken springs or unbalanceddoor could result in an open door failing rapidly and/or unexpectedly.

7.NEVERuse emergency releasehandle unless garage doorway is clear of persons and obstructions.

8.NEVERuse handle to pull garagedoor open or closed. If rope knot becomes untied, you could fall.

Using Your Garage Door Opener

Your Security÷ ® opener and hand-held remote control have been factory-set to a matching code which changes with each use, randomly accessing over 100 billion new codes. Your opener will operate with up to eight Security÷ ® remote controls and one Security÷ ® Keyless Entry System. If you purchase a new remote, or if you wish to deactivate any remote, follow the instructions in the Programming section.

Activate your opener with any of the following:

The hand-held Remote Control: Hold the large push button down until the door starts to move.

The wall-mounted Door Control: Hold the push button or bar down until the door starts to move.

The Keyless Entry (See Accessories): If provided with your garage door opener, it must be programmed before use. See Programming.

When the opener is activated (with the safety reversing sensor correctly installed and aligned)

1.If open, the door will close. If closed, it will open.

2.If closing, the door will reverse.

3.If opening, the door will stop.

4.If the door has been stopped in a partially open position, it will close.

5.If obstructed while closing, the door will reverse. If the obstruction interrupts the sensor beam, the opener lights will blink for five seconds.

9.If one control (force or travel limits) is adjusted, the other control may also need adjustment.

10.After ANY adjustments are made, the safety reversal system MUST betested.

11.Safety reversalsystem MUST betested every month. Garagedoor MUST reverseon contact with 1-1/2" high (3.8 cm) object (or a 2x4 laid flat) on the floor.

12.ALWAYSKEEPGARAGEDOORPROPERLYBALANCED (see page3). An improperly balanced door may not reversewhen required and could result in SEVEREINJURY or DEATH.

13.ALL repairs to cables, spring assemblies and other hardware,all of which are under EXTREMEtension, MUST be made by a trained door systems technician.

14.ALWAYSdisconnect electric power to garage door opener BEFOREmaking ANY repairs or removing covers.

1s.SAVETHESEINSTRUCTIONS.

6.If obstructed while opening, the door will stop.

7.If fully open, the door will not close when the beam is broken. The sensor has no effect in the opening cycle.

If the sensor is not installed, or is misaligned, the door won'tclose from a hand-held remote. However, you can close the door with the Door Control, the Outdoor Key Switch, or Keyless Entry, if you activate them until down

travel is complete. If you release them too soon, the door will reverse.

The opener lights will turn on under the following conditions: when the opener is initially plugged in; when

power is restored after interruption; when the opener is activated.

They will turn off automatically after 4-1/2 minutes or provide constant light when the Light feature on the Premium Control Console Panel is activated. Bulb size is

A19. Bulb power is 100 watts maximum.

Security,I _ light feature: Lights will also turn on when someone walks through the open garage door. With a Premium Control Console, this feature may be turned off as follows: With the opener lights off, press and hold the light button for 10 seconds, until the light goes on, then off again. To restore this feature, start with the opener lights on, then press and hold the light button for 10 seconds until the light goes off, then on again.

30

Image 30
Contents Abridor DE Puerta DE Cochera DE 315MN= Contents IntroductionTools needed Preparing your garage doorPlanning Sectional Door InstallationSectional Door Installations Finished CeilingONE-PIECE Door with Track ONE-PIECE Door InstallationsONE-PIECE Door Without Track Finished CeungCarton Inventory SECURITY+Assembly Hardware Installation HardwareHardware Inventory Assembly Step Assemble the RailHardware Shown Actual Size Fasten the Rail to the Motor Unit Install the Trolley Installation Readand Followall Installationwarningsand InstructionsAttach the Rail Brackets Installation Step Determine the Header Bracket LocationInstall the Header Bracket Wall Header Bracket InstallationCeiling Header Bracket Installation Attach the Rail to the Header Bracket Install The Protector System Important Information about Safety Reversing SensorWall installation Installing the BracketsGarage door track installation preferred Floor installation FigureMounting and Wiring the Safety Sensors Recommended Wire RoutingPosition the Opener Sectional Door or ONE-PIECE Door with TrackEngaged Released Hang the Opener Fenshed Ceung Hardware Shown Actual SizeInstall Door Control Troubleshooting the Safety Reversing Sensors Complete the Safety Reversing Sensor InstallationAligning the Safety Reversing Sensors Permanent Wiring ConnectionInstall the Lights Attach the Emergency Release Rope and HandleFasten the Door Bracket Sectional DoorsONE-PIECEDOORS Connect Door Arm to Trolley Sectional Doors onlyAssemble the door arm, Figure Adjustment procedures, FigureALL ONE-PIECE Doors Connect the door arm to the trolleyHOW and When to Adjust the Limits Adjustment StepAdjust the Travel Limits If door does not open at least 5 feet 1.5 mTest the Down close force Adjust the ForceHOW and When to Adjust the Forces Test the UP open forceImportant Safety Check Test the Safety Reversal SystemAdjust Test The Protector SystemUsing Your Garage Door Opener OperationReadand Followall Warningsand Instructions Using the Wall.Mounted Door Control Light featureTo Open the Door Manually Once a Month Remote Control BatteryCare of Your Opener Once a YearHaving a PROBLEM? Refer to Adjustment , Adjust the ForceSymptom LED is not lit on door control Symptom Motor unit doesnt operateProgramming To Add or Reprogram a Hand-held Remote ControlUsing the Learn Button Using the Premium Control Console To Erase All Codes From Motor Unit MemoryEntry is already mounted outside the garage To Add Reprogram Change Keyless Entry PINMust be programmed To operate Your Garage door Opener To change an existing, known PINKEY Part NO. NO. Description Repair PartsRail Assembly Parts Installation Parts Not ShownMotor Unit Assembly Parts KEY PartKEY Part NO. NO.DESCRIPTION Service AccessoriesWarranty For Sectional Doors OnlyContenido IntroduccionPreparaci6n de la puerta de su cochera Herramientas necesariasInstalacion EN UNA Puerta Seccional Planificaci6nInstalacicn CON UNA Puerta Seccional Techo TERMI/ADOPuerta DE UNA Sola Pieza SIN Carril Planificaci6n continbaInstalacion CON Puertas DE UNA Sola Pieza Puerta DE UNA Pieza CON CarrilInventario de las caja de cart6n Inventario de Piezas Tornillera Y Piezas Para EL MontajeMontaje Paso Monte el rielMontaje el riel continba Estas Piezas SE Muestran EN SU Tamano RealFije el riel a la unidad del motor e instale el trole Estas Piezas SE Muestran EN SU Tamaiio RealLA Muerte Fijacibn de las mnsulas del rielCabezal Instalacion PasoDetermine dbnde va a instalar la Mnsula del Cabezal EltechoInstale la mnsula del cabezal Instalacion DE LA Mensula DEL Cabezal EN ELColocacibn del riel en la mnsula del cabezal Estas Piezas SE Muestran EN SU Tamaiio RealInstale la Sistema de Protecci6n Enfrentando la puerta desde el lado interno del garajeInstalaci6n en el piso Figura Instalacion DE LAS McnsulasInstalaci6n en la pared Figura 2 y Montajeparedlado DerechoRuta recomendada para el cableado Coloque el Abridor en Posici6n Puerta DE UNA Sola Pieza SIN RielEnganchado Desenganchado INSTALACION, Paso Cuelgue el AbridorInstale la unidad de control de la puerta Estas Piezas SE Muestran EN SU Tamaio RealQuitar Y Volvera Ponerlatapa Requisitos para la instalaci6n el6ctrica COMe Alinear LOS Sensores DE SeguridadInstale las Luces Coloque la Cuerda y la Manija De EmergenciaFije la mnsula de la puerta Puertas SeccionalesPuertas DE UNA Sola Pieza Conecte el brazo de la puerta al trole SLO Para Puertas SeccionalesTodas LAS Puertas DE UNA Sola Pieza Arme el brazo de la puerta, FiguraAjustes Paso Ajuste el limite del recorrido Hacia Arriba y Hacia AbajoCalcomanade Ajustes Ajuste de la fuerza Etiouetade Ajustede FuerzaPrueba Pruebe la Sistema de Protecci6nPruebe el Sistema de Retroceso de Seguridad AjusteC6mo Usar su Abridor de Puerta de Cochera ConserveestasinstruccionesOperacion Active su abridor de alguna de las siguientes manerasComo Desconectar EL Trole C6mo usar la unidad de control de paredC6mo abrir la puerta manualmente CMO Reconectar EL TroleMantenimiento DE SU Abridor DE Puerta DE Cochera Ajustes DE Lmite Y FuerzaSI Tiene Algon Problema El control remoto no activa la puertaTabla de Diag El motorComo Programar EL Abridor C6mo Agregar o Reprogramar un Control Remoto ManualControles Remotos de 3 Funciones Para cambiar un PIN existente Accesorios Riel de 2.4 m 8 piesNo.,a,,erw.orna1,,noe.,a,,erw.so,1

139.53993D specifications

The Craftsman 139.53993D is a top-tier garage door opener designed for efficiency, convenience, and durability. This model is part of Craftsman's renowned lineup, known for reliable home improvement products. With its advanced features and technology, this garage door opener offers users a blend of functionality and modern convenience.

One of the standout features of the Craftsman 139.53993D is its powerful motor. Equipped with a robust 1/2 horsepower motor, it delivers strong lifting power, making it suitable for handling standard residential garage doors with ease. This strength ensures a smooth and reliable operation, even for heavier doors.

The technology integrated into the Craftsman 139.53993D significantly enhances security. This model utilizes a rolling code technology that changes the code each time the remote is used, making it nearly impossible for intruders to gain access. The safety features extend to the presence of an infrared safety sensor, which detects any obstacles in the door’s path and reverses its direction, preventing accidents and injuries.

Convenience is a key characteristic of this garage door opener. The Craftsman 139.53993D is compatible with various remote controls, including a keypad entry, allowing for keyless entry. Additionally, the model includes an integrated Wi-Fi capability. This feature grants homeowners remote access via a mobile app, enabling them to monitor and control their garage door from anywhere, adding an extra layer of convenience.

Installation is user-friendly owing to its clear instructions and included components. Most users can set it up in a short timeframe without professional help. Furthermore, the design of the motor unit is compact, allowing for easy placement and ensuring that it does not take up excessive space in the garage.

Alongside its functionality, the Craftsman 139.53993D is built with durability in mind. It features all-steel construction, providing long-lasting reliability and strength, suitable for the demands of daily use. The quiet operation is another impressive feature, ensuring that the door opens and closes smoothly without causing disturbances.

In summary, the Craftsman 139.53993D garage door opener stands out with its powerful motor, advanced security features, convenient technology, and robust construction. It reflects Craftsman's commitment to quality and innovation in home improvement solutions, making it a dependable choice for homeowners seeking a reliable garage door opener.