Craftsman 139.53993D To Add Reprogram Change Keyless Entry PIN, To change an existing, known PIN

Page 36

To Add,

Reprogram

or

Change

a

Keyless

Entry PIN

NOTE: Your new Keyless Entry

must be programmed

to operate

your

garage door

opener,

USING THE "LEARN" BUTTON

 

 

USING THE PREMIUM

CONTROL CONSOLE

1, Press and release the "learn" button

NOTE: This method requires two people if the Keyless

on motor unit, The learn indicator light

Entry is already mounted outside the garage,

will glow steadily for 30 seconds,

1, Enter a four digit personal identification

 

 

number (PIN) of your choice on the

2, Within 30 seconds, enter a four digit

keypad. Then press and hold ENTER.

 

personal identification number (PIN) of

 

your choice on the keypad. Then

 

press and hold the ENTER button.

 

 

2. While holding the ENTER button, press

 

and hold the LIGHT button on the

3, Release the button when the motor

Premium Control Console,

 

unit lights blink, It has learned the

 

code. If light bulbs are not installed,

3, Continue holding the ENTER and

two clicks will be heard.

LIGHT buttons while you press the push

 

 

bar on the Premium Control Console (all

To change an existing, known PIN

three buttons are held),

If the existing PIN is known, it may be changed by one

 

person without using a ladder,

4, Release buttons when the motor unit

1, Press the four buttons for the present PIN, then press

lights blink, It has learned the code, If

light bulbs are not installed, two clicks

and hold the # button,

The opener light will blink twice, Release the # button,

will be heard.

 

2. Press the new 4-digit PIN you have chosen, then

2, Press the temporary 4-digit PIN you have chosen, then

press Enter.

press Enter,

The motor unit lights will blink once when the PIN has been

The opener light will blink four times.

learned,

Test by pressing the new PIN, then press Enter, The door

3, To set the number of hours this temporary PIN will work,

press the number of hours (up to 255), then press _,

should move.

To set a temporary PIN

OR

3, To set the number of times this temporary PIN will work,

You may authorize access by visitors or service people with

press the number of times (up to 255), then press #,

a temporary 4-digit PIN, After a programmed number of

The opener light will blink once when the temporary PIN

hours or number of accesses, this temporary PIN expires

has been learned,

and will no longer open the door, It can be used to close the

Test by pressing the four buttons for the temporary PIN,

door even after it has expired. To set a temporary PIN:

1, Press the four buttons for your personal entry PIN (not

then press Enter, The door should move, If the temporary

PIN was set to a certain number of openings, remember

the last temporary PIN), then press and hold the

that the test has used up one opening.To clear the

button,

temporary password, repeat steps 1-3, setting the number

The opener light will blink three times, Release the

of hours or times to 0 in step 3.

button,

 

One Button Close: Opener can be closed by pressing only the ENTER button if the one button close feature has been activated, This feature has been activated at the factory. To activate or deactivate this feature press and hold buttons 1 and 9 for 10 seconds. The keypad will blink twice when the one button close is active, The keypad will blink four times when one button close is deactivated,

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Abridor DE Puerta DE Cochera DE 315MN= Contents IntroductionTools needed Preparing your garage doorSectional Door Installation Sectional Door InstallationsPlanning Finished CeilingONE-PIECE Door Installations ONE-PIECE Door Without TrackONE-PIECE Door with Track Finished CeungCarton Inventory SECURITY+Assembly Hardware Installation HardwareHardware Inventory Assembly Step Assemble the RailHardware Shown Actual Size Fasten the Rail to the Motor Unit Install the Trolley Installation Readand Followall Installationwarningsand InstructionsAttach the Rail Brackets Installation Step Determine the Header Bracket LocationInstall the Header Bracket Wall Header Bracket InstallationCeiling Header Bracket Installation Attach the Rail to the Header Bracket Install The Protector System Important Information about Safety Reversing SensorInstalling the Brackets Garage door track installation preferredWall installation Floor installation FigureMounting and Wiring the Safety Sensors Recommended Wire RoutingPosition the Opener Sectional Door or ONE-PIECE Door with TrackEngaged Released Hang the Opener Fenshed Ceung Hardware Shown Actual SizeInstall Door Control Complete the Safety Reversing Sensor Installation Aligning the Safety Reversing SensorsTroubleshooting the Safety Reversing Sensors Permanent Wiring ConnectionInstall the Lights Attach the Emergency Release Rope and HandleFasten the Door Bracket Sectional DoorsONE-PIECEDOORS Connect Door Arm to Trolley Sectional Doors onlyAdjustment procedures, Figure ALL ONE-PIECE DoorsAssemble the door arm, Figure Connect the door arm to the trolleyAdjustment Step Adjust the Travel LimitsHOW and When to Adjust the Limits If door does not open at least 5 feet 1.5 mAdjust the Force HOW and When to Adjust the ForcesTest the Down close force Test the UP open forceTest the Safety Reversal System AdjustImportant Safety Check Test The Protector SystemUsing Your Garage Door Opener OperationReadand Followall Warningsand Instructions Using the Wall.Mounted Door Control Light featureTo Open the Door Manually Remote Control Battery Care of Your OpenerOnce a Month Once a YearHaving a PROBLEM? Refer to Adjustment , Adjust the ForceSymptom LED is not lit on door control Symptom Motor unit doesnt operateTo Add or Reprogram a Hand-held Remote Control Using the Learn Button Using the Premium Control ConsoleProgramming To Erase All Codes From Motor Unit MemoryTo Add Reprogram Change Keyless Entry PIN Must be programmed To operate Your Garage door OpenerEntry is already mounted outside the garage To change an existing, known PINRepair Parts Rail Assembly Parts Installation PartsKEY Part NO. NO. Description Not ShownMotor Unit Assembly Parts KEY PartKEY Part NO. NO.DESCRIPTION Accessories WarrantyService For Sectional Doors OnlyContenido IntroduccionPreparaci6n de la puerta de su cochera Herramientas necesariasPlanificaci6n Instalacicn CON UNA Puerta SeccionalInstalacion EN UNA Puerta Seccional Techo TERMI/ADOPlanificaci6n continba Instalacion CON Puertas DE UNA Sola PiezaPuerta DE UNA Sola Pieza SIN Carril Puerta DE UNA Pieza CON CarrilInventario de las caja de cart6n Inventario de Piezas Tornillera Y Piezas Para EL MontajeMontaje Paso Monte el rielMontaje el riel continba Estas Piezas SE Muestran EN SU Tamano RealFije el riel a la unidad del motor e instale el trole Estas Piezas SE Muestran EN SU Tamaiio RealLA Muerte Fijacibn de las mnsulas del rielInstalacion Paso Determine dbnde va a instalar la Mnsula del CabezalCabezal EltechoInstale la mnsula del cabezal Instalacion DE LA Mensula DEL Cabezal EN ELColocacibn del riel en la mnsula del cabezal Estas Piezas SE Muestran EN SU Tamaiio RealInstale la Sistema de Protecci6n Enfrentando la puerta desde el lado interno del garajeInstalacion DE LAS Mcnsulas Instalaci6n en la pared Figura 2 yInstalaci6n en el piso Figura Montajeparedlado DerechoRuta recomendada para el cableado Coloque el Abridor en Posici6n Puerta DE UNA Sola Pieza SIN RielEnganchado Desenganchado INSTALACION, Paso Cuelgue el AbridorInstale la unidad de control de la puerta Estas Piezas SE Muestran EN SU Tamaio RealQuitar Y Volvera Ponerlatapa Requisitos para la instalaci6n el6ctrica COMe Alinear LOS Sensores DE SeguridadInstale las Luces Coloque la Cuerda y la Manija De EmergenciaFije la mnsula de la puerta Puertas SeccionalesPuertas DE UNA Sola Pieza Conecte el brazo de la puerta al trole SLO Para Puertas SeccionalesTodas LAS Puertas DE UNA Sola Pieza Arme el brazo de la puerta, FiguraAjustes Paso Ajuste el limite del recorrido Hacia Arriba y Hacia AbajoCalcomanade Ajustes Ajuste de la fuerza Etiouetade Ajustede FuerzaPruebe la Sistema de Protecci6n Pruebe el Sistema de Retroceso de SeguridadPrueba AjusteConserveestasinstrucciones OperacionC6mo Usar su Abridor de Puerta de Cochera Active su abridor de alguna de las siguientes manerasC6mo usar la unidad de control de pared C6mo abrir la puerta manualmenteComo Desconectar EL Trole CMO Reconectar EL TroleMantenimiento DE SU Abridor DE Puerta DE Cochera Ajustes DE Lmite Y FuerzaSI Tiene Algon Problema El control remoto no activa la puertaTabla de Diag El motorComo Programar EL Abridor C6mo Agregar o Reprogramar un Control Remoto ManualControles Remotos de 3 Funciones Para cambiar un PIN existente Accesorios Riel de 2.4 m 8 piesNo.,a,,erw.orna1,,noe.,a,,erw.so,1

139.53993D specifications

The Craftsman 139.53993D is a top-tier garage door opener designed for efficiency, convenience, and durability. This model is part of Craftsman's renowned lineup, known for reliable home improvement products. With its advanced features and technology, this garage door opener offers users a blend of functionality and modern convenience.

One of the standout features of the Craftsman 139.53993D is its powerful motor. Equipped with a robust 1/2 horsepower motor, it delivers strong lifting power, making it suitable for handling standard residential garage doors with ease. This strength ensures a smooth and reliable operation, even for heavier doors.

The technology integrated into the Craftsman 139.53993D significantly enhances security. This model utilizes a rolling code technology that changes the code each time the remote is used, making it nearly impossible for intruders to gain access. The safety features extend to the presence of an infrared safety sensor, which detects any obstacles in the door’s path and reverses its direction, preventing accidents and injuries.

Convenience is a key characteristic of this garage door opener. The Craftsman 139.53993D is compatible with various remote controls, including a keypad entry, allowing for keyless entry. Additionally, the model includes an integrated Wi-Fi capability. This feature grants homeowners remote access via a mobile app, enabling them to monitor and control their garage door from anywhere, adding an extra layer of convenience.

Installation is user-friendly owing to its clear instructions and included components. Most users can set it up in a short timeframe without professional help. Furthermore, the design of the motor unit is compact, allowing for easy placement and ensuring that it does not take up excessive space in the garage.

Alongside its functionality, the Craftsman 139.53993D is built with durability in mind. It features all-steel construction, providing long-lasting reliability and strength, suitable for the demands of daily use. The quiet operation is another impressive feature, ensuring that the door opens and closes smoothly without causing disturbances.

In summary, the Craftsman 139.53993D garage door opener stands out with its powerful motor, advanced security features, convenient technology, and robust construction. It reflects Craftsman's commitment to quality and innovation in home improvement solutions, making it a dependable choice for homeowners seeking a reliable garage door opener.
Top Page Image Contents