BISTRO
INSTALLATION
–Place the appliance on a stable, horizontal surface that is neither hot nor near a heat source. The surface must be dry. Keep the appliance and cord out of the reach of children.
–Check that the voltage indicated on the rating label of the appliance corresponds to the local mains voltage. Connect the appliance only to a properly earthed wall outlet with an output rating of at least 6 A. (Use a residual current device (RCD) – please contact a qualified electrician for advice.) The wall outlet must be easily accessible while the appliance is in use in case of emergency. The manu- facturer is not responsible for accidents caused by poor or inexistent grounding of the appliance.
–If the plug provided with the appliance is incompatible with the wall outlet, have it changed by a qualified electrician.
PARTS OF THE BLENDER STICK
1Motor unit
2Blender wand
3Blender head
4
5
6Mains cord
7Multiblade
8Whisk
9Beater
10Lidded beaker
11Tool for removing the attachments
SPECIAL ADVICE
MAINS CORD
–If care is taken, a mains extension cable can be used.
–If a mains extension cable is used, its electrical rating must at least match that of the appliance; if the appliance is earthed, the extension cable must be a
–For USA – Canada
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
4