before using your blender
•Before using your VillaWare® Blender for the first time, follow the “after using your blender instructions” to disassemble the jar assembly and wash the lid, feeder cap, blade and threaded bottom cap in warm, soapy water or in the top rack of the dishwasher. Rinse and dry well.
ASSEMBLY INSTRUCTIONS:
THE BLADES ARE EXTREMELY SHARP. HANDLE CAREFULLY.
Follow the assembling instructions listed below before using your VillaWare® Blender:
Figure 1
Figure 2
Figure 3
•Turn jar upside down so that the small opening is at the top (Figure 1).
Figure 4
•Ensure secure fit of sealing ring between jar and blade assembly
(Figure 4).
•Put the sealing ring around the blade assembly (Figure 2).
Figure 5
•Place jar skirt facing down around jar (Figure 5).
•Place neck of blade assembly on the rim of the small jar opening. Tilt blades inside jar. NOTE:
Blades may drag slightly against jar. (Figure 3).
Figure 6
•Place threaded bottom cap over small jar opening and turn it clockwise to tighten
(Figure 6).
Figure 7
Figure 8
•Place jar assembly onto motor base (Figure 7). Curve on jar skirt will be centrally located over dial.
•Place lid with feeder cap on jar (Figure 8).
5