Denon DRA-395 manual Multi-Source recording/playback

ENGLISH

Multi-Source recording/playback

The Multi-Source function allows you to record a source other than the source currently playing or to output its signal to the MULTI ZONE output terminal.

[1] Playing one source while recording another (REC OUT mode)

B

1	Press the REC OUT button.
	• REC lights and the unit is set to

the REC OUT mode.

REC OUT

(Main unit)

	1, 4	2
DISPLAY	1	2

2	Press the SELECT button until the	SELECT
	source you want to record appears
	on the set's display.
	• The indicator for the selected
	program source lights.	(Main unit)
3	Set the recording mode.

•For operating instructions, refer to the manual of the component on which you want to record.

4 To cancel, press the REC OUT button again.

REC OUT

(Main unit)

•REC is extinguished and the REC OUT mode of this unit is cancelled.

NOTES:

•The signals of the source selected in the REC OUT mode are also output from the ZONE 2 and ZONE 3 output terminals. (There is output when ZONE 2 and ZONE 3 are ON.)

•When the REC OUT mode is set and both the ZONE 2 and ZONE 3 modes are set to “ON”, the modes do not turn off even when the REC OUT button is pressed.

To turn them off, set the ZONE 2 and ZONE 3 modes to “OFF”.

17