Frymaster BIGLA30 warranty CE GAS Conversion Instructions

Page 17

Conversion of this appliance from one type of gas to another should only be performed by qualified, licensed, and authorized installation or service personnel, as defined in Section 1.6 of this manual.

BIGLA30 LOV™ gas fryers manufactured for Non-CE countries use different burners for each type gas. The burners in fryers built for propane gas have a special gray-colored coating on the burner tiles to enable them to withstand the higher caloric value of the propane gas. Burners designed for use in propane units may be used in natural gas applications, but not vice versa.

Non-CE Gas Conversion Kits

 

Natural Gas to Propane (LP) Gas

Propane (LP) Gas to Natural Gas

 

 

 

Full Vat before 09/10: PN 826-2527

Full Vat before 09/10: PN 826-2528

 

 

 

Dual Vat before 09/10: PN 826-2529

Dual Vat before 09/10: PN 826-2530

 

 

 

Full Vat after 09/10: PN 826-2965

Full Vat after 09/10: PN 826-2967

 

 

 

Dual Vat after 09/10: PN 826-2966

Dual Vat after 09/10: PN 826-2968

 

 

 

 

 

 

 

 

 

 

 

 

Non-CE Gas Conversion Kits for Australia

 

 

 

Natural Gas to Propane (LP) Gas

Propane (LP) Gas to Natural Gas

 

 

 

Full Vat before 09/10: PN 826-2745

Full Vat before 09/10: PN 826-2747

 

 

 

Dual Vat before 09/10: PN 826-2746

Dual Vat before 09/10: PN 826-2748

 

 

 

Full Vat after 09/10: PN 826-2969

Full Vat after 09/10: PN 826-2971

 

 

 

Dual Vat after 09/10: PN 826-2970

Dual Vat after 09/10: PN 826-2972

 

 

 

 

 

 

 

 

 

 

 

 

Units manufactured for export to CE countries are equipped with “universal” burners that may be used with either Natural (G20, G25) gas or Butane (G30) and Propane (G31) gasses.

CE Gas Conversion Kits for Units with Gas Valve 810-1715

G20 or G25 (Natural) to G30 or G31 Gas:

G30 or G31 to G20 or G25 (Natural) Gas:

before 09/10 PN 826-2973

before 09/10 PN 826-2974

after 09/10 PN 826-2975

after 09/10 PN 826-2976

 

 

 

 

CE GAS CONVERSION INSTRUCTIONS

1.Between G20- and G25-type Natural Gas, adjust the gas pressure at the regulator. (Refer to the CE Standard Burner Manifold Gas Pressure Chart.) Do not change the orifice.

2.Between a 2nd family (G20 or G25) and a 3rd family gas (G30 Butane or G31 Propane):

a.Change the orifices.

b.Adjust the manifold pressure.

3.Remove the old rating plate and return to Frymaster. Affix the new rating plate included with the conversion kit in place of the old rating plate stating the gas has been converted.

4.If the destination language changes, replace the rating plate. Call your local service agency or KES for a label kit. The language of reference will be on the corner of the label.

2-8

Image 17
Contents Manufactured Canada Page LOV GAS Warranty Statement Parts Return General Safety InformationEuropean Community CE Specific Information Installation, Operating, and Service PersonnelComputer Information for the M3000 Computers Qualified AND/OR Authorized Operating Personnel Qualified Installation PersonnelQualified Service Personnel Retain and Store this Manual in a Safe Place for Future USE Clearance and Ventilation General Installation RequirementsElectrical Grounding Requirements National Code RequirementsCaster Installation Non-CE Standard For Incoming Gas Pressures Gas Connection Pipe Sizes CE Standard Gas Vat Converting to Another Gas TypeCE GAS Conversion Instructions After Fryers are Positioned at the Frying Station BIGLA30 Series GEN II LOV GAS Fryer Operating Instructions Typical Configuration BIGLA330 ShownPage Lighting the Fryer Press the computer ON/OFF switch to the OFF positionOperation ShutdownInstall the JIB Low Oil Volume Automatic RefillPrepare the System for Use Changing the JIBFront of the fryer off see Figure M3000 General Information FR FriesBasic Operation Cooking with Multi-Product Display Cooking with Dedicated Display Changing from Breakfast Setup to Lunch Changing from Lunch Setup to Breakfast M3000 Button Description and Functions Filter, Temperature and Info ButtonsNavigation Buttons Cook Channel and Selection ButtonsDraining, Refilling, and Disposing of Oil M3000 Menu Summary Tree1234 Fryer Setup Mode Programming24hR Full 10 M3000 Common TasksEscape Menu Items Selection Adding New Product Items to the Menu Product SelectionProduct ProdCook ID Disable To Level 1 program changing to the Product selection Storing Menu Items in Product ButtonsProduct selection prompt Disposal for Non-Bulk Oil Systems Draining and Refilling Vats, and Disposing of OilRefilling JIB Oil Systems Draining and Disposing Oil using Bulk Oil SystemsPage Refilling the Vat from Bulk Oil Systems after Disposal Accessing the Filter MenuDrain to Pan Yes no Fill Vat from Drain PanFill Vat from Bulk Pan to Waste Programming Level OneAIF Clock Selection display Deep Clean Mode BOIL-OUTEMPTY? and Yes no PANPage HIGH-LIMIT Test Mode Comp Programming Level TwoLevel 2 Program Product Comp ModePassword Setup Mode LOG ModeAlert Tone Mode Filter After Filter Time Info ModeSplit VAT Configuration Filter Stats ModeFull VAT Configuration DAY wed, Date 03/20/07 Current day and date Review Usage Mode4321 Last Load ModeFull / Split VAT Configuration Page Introduction BIGLA30 Series GEN II LOV GAS Fryer Filtration InstructionsDo not USE Filter Powder with the PAD Auto Demand Filtration DRAINING, Washing and Filling during the processPage Clogged Drain Error System Error Filter Error FlowchartNormal Operation Resumes FIXED? YES no is displayedClogged Drain or Oil Sensor Fail Flowchart Filter Busy Page Page Daily Checks and Service Fryer Preventive Maintenance Checks and ServiceInspect Fryer and Accessories for Damage Clean Fryer Cabinet Inside and Out DailyCleaning the Frypot Quarterly Weekly Checks and Service 6.3.1 Clean Behind FryersDeep Clean Boiling Out the Frypot Clean Filter Pan, Detachable Parts and AccessoriesQuarterly Checks and Service BI-WEEKLY Checks and ServiceClean Combustion Air Blower Assembly Check M3000 Computer Set Point AccuracyLeft Viewing PortRight Port is Behind Motor Replace the O-RINGS Clean Oil Level SensorAnnual/Periodic System Inspection FryerBuilt-In Filtration System BIGLA30 Series GEN II LOV GAS Fryer Operator Troubleshooting Change Filter Service Auto Top Off Problems Probable Causes Corrective Action Explanation ProblemError Drain Valve not Closed Used oil to a JIB Bulk Oil SystemsMelter ON/OFF switch Reset oil reservoir system Service Hotline
Related manuals
Manual 86 pages 17.38 Kb Manual 26 pages 13.97 Kb

BIGLA30 specifications

The Frymaster BIGLA30 is a state-of-the-art commercial frying solution designed to meet the high demands of busy food service environments. Known for its energy efficiency, reliability, and advanced technology, the BIGLA30 has become a favorite among restaurateurs and catering businesses.

One of the standout features of the BIGLA30 is its large capacity. With a significant oil capacity, it allows for frying large quantities of food simultaneously, making it ideal for high-volume establishments. This capacity enables kitchens to keep up with demand during peak hours, ensuring that orders are fulfilled quickly and efficiently.

The Frymaster BIGLA30 is equipped with advanced digital controls that simplify the frying process. The intuitive interface allows operators to easily adjust cooking times and temperatures, ensuring consistent results. The digital controls are also equipped with a filtration system that automatically cleans the oil, which prolongs its life and ensures the food maintains optimal flavor.

Another prominent feature of the BIGLA30 is its energy-efficient design. It utilizes innovative heating technology that reduces energy consumption while providing high-performance frying. This not only helps to lower operational costs but also supports environmentally friendly practices within the kitchen.

Safety is paramount in any commercial kitchen, and the BIGLA30 excels in this area. It is designed with safety mechanisms such as automatic shut-off and temperature control systems to prevent overheating. Additionally, the unit features large, easy-to-grip handles on pots, allowing for safe handling and transfer of food items.

In terms of construction, the Frymaster BIGLA30 is built with high-quality materials that ensure durability and longevity. The robust design can withstand the rigors of a busy kitchen and is easy to maintain, reducing downtime and service costs. Its sleek stainless-steel exterior not only presents a professional aesthetic but is also simple to clean, contributing to overall kitchen hygiene.

Furthermore, the BIGLA30 is compatible with various cooking applications, making it versatile enough to fry a wide range of items from crispy fries to delicious chicken. This adaptability makes it a valuable addition to any food service operation.

In summary, the Frymaster BIGLA30 is a top-tier frying solution that combines capacity, energy efficiency, advanced technology, and safety features. Its ability to deliver consistent results while minimizing costs makes it an essential tool for any commercial kitchen.