EK111 EGG Boiler in Stainless Steel, Design, Operation

INSTRUCTION MANUAL

EK111 EGG BOILER IN STAINLESS STEEL

Dear customer,

Please read these Operating Instructions through carefully before connecting your device to the mains, in order to avoid damage due to incorrect use. Please pay particular attention to the safety information. If you pass the device on to a third party, these Operating Instructions must also be handed over.

DESIGN

1. Motor unit		6

2.Egg tray

3.	Egg pecker	5

							7

4.	Egg insert
4.	Egg insert
5.	Cover hood
5.	Cover hood						8
6.	Steam opening	4					8
6.	Steam opening						9
7.	Power cord with power plug

		3
8.	Handle (hood)	2
8.	Handle (hood)	2				10
9.	Handle (egg tray)

		1

10.	Switch I O
10.	Switch I O				11
11.	Water tray				11
11.	Water tray	1	2	12
12.	Scale	1	2	13
12.	Scale
13.	Measuring beaker
13.	Measuring beaker

SAFETY INFORMATION

•Incorrect operation and improper use can damage the appliance and cause injury to the user.

•The appliance may be used only for it’s intended purpose. No responsibility can be taken for any possible damage caused through incorrect use or improper handling.

•Before connecting the appliance to the power source, check that the current and power match those given on the rating plate.

•Do not put the appliance or the plug in water or any other liquid. However should the appliance accidentally fall into water, unplug the appliance immediately and have it checked by a qualified person before using it again. Non-observance could cause a fatal electric shock!

•Never attempt to open the housing yourself.

•Do not place any kind of object into the inside of the housing.

•Do not use the appliance with wet hands, on a damp floor or when the appliance itself is wet.

•Do not touch the plug with wet or damp hands.

•Check the cord and the plug regularly for any possible damage. If the cord or plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a hazard.

•Do not use the appliance if it is dropped or otherwise damaged or if the cord or plug are damaged. In the case of damage, take the appliance to an electrical repair shop for examination and repair if necessary.

•Never attempt to repair the appliance yourself. This could cause an electric shock.

•Do not allow the cord to hang over sharp edges and keep it well away from hot objects and naked flames. Remove the plug from the socket only by holding the plug.

•For extra protection it is possible to fit the electric household installation with a fault current breaker with a rated breaking current of not more than 30mA. Ask your electrician for advice.

•Make sure that there is no danger that the cord or extension cord may inadvertently be pulled or cause anyone to trip when in use.

•If an extension cord is used it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur.

•This appliance is not suitable for commercial use nor for use in the open air.

•Never leave the appliance unattended while it is in use.

•Children cannot recognise the dangers involved in the incorrect use of electrical appliances. Therefore never allow children to use household appliances without supervision.

•Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned.

•Danger! Nominal voltage is still present in the appliance as long as the appliance is connected to the mains socket.

•Switch the appliance off before disconnecting from the mains.

•Never use the cord to carry the appliance.

SPECIAL SAFETY INSTRUCTIONS

•The unit heats up very quickly and cools down only very slowly. Watch out therefore constantly for hot water and steam emitted during use. Touch it only on the handles.

•Do not use any accessories not supplied with this unit!

•Do not place this unit next to hot devices (e.g. next to a cooker or oven).

•Caution: The power cord must not touch the hot parts of the unit during operation!

•This unit is suitable only for boiling eggs. Please do not try to heat up other foodstuff with this unit.

•Do not operate this unit without the cover (6) and without the egg tray (2).

BEFORE STARTING FOR THE FIRST TIME

•Remove all packing material.

•Clean the unit before using it for the first time (see CLEANING AND CARE).

•There can be some smoke and smell when using it for the first time. Residues left over from the manufacturing process are being burned on the surface of the unit.

OPERATION

•You can boil up to 7 hen’s eggs per cooking session. Please always use only fresh eggs.

•Place the egg tray (2) on the motor unit (1).

•Please use the egg-pick (3) to pierce a hole in the egg's blunt end. Please

do not use force, otherwise the egg might break.

Caution, Danger of injury: The needle of the egg pecker (3) is very sharp! You can place only one egg in each of the seven egg inserts (4). Please put

in the bigger end of the egg into the egg insert (4) (see the figure).

• Now fill in the required quantity of cold, clear water into the measuring beaker (13). The quantity of water depends upon the number of eggs to be

boiled and the hardness desired (soft, medium or hard boiled). There are three scales (12) on the measuring beaker (13) showing how much water to use (indications are in English, German and

French).
Scale 1	– soft, weich, mollet	Cooking time approx. 12 min.
Scale 2	– medium, mittel, medium	Cooking time approx. 15 min.
Scale 3	– hard, hart, dur	Cooking time approx. 17 min.

•Example: If you want to make four soft-boiled eggs, fill water up to the marking 4 on scale 1 (12).

•If the water is very hard, you can add half a teaspoon of vinegar. Please do not otherwise use any fluids other than water. Also, do not add any additives (such as salt) into the water.

•Now pour the water from the measuring beaker (13) into the water tray (11). Take care not to spill any water on the housing of the motor unit (1)!

•Cover the egg insert (4) with the cover (5). Please ensure that egg insert (4) and cover (5) fit properly on the motor unit (1).

•Put the switch I O (10) in position O (= Unit off).

•Connect the mains plug (7) through a suitable plug socket and put the switch O/I (10) in position I. The indicator lamp in the switch O/I (10) lights up.

•The hot plate on the motor unit (1) begins to heat up the water in the water tray (11).

•Caution: Parts of the unit become very hot during and after use! While the unit is in use, touch it only at the handles (8, 9). Please watch out particularly for hot water and emitted steam!

•Burning hazard: Do not shift the unit while it is in use.

EK111 specifications

The Elta EK111 is an advanced airborne radar system renowned for its exceptional capabilities in surveillance, reconnaissance, and target acquisition. Developed by Israel Aerospace Industries, the EK111 represents a significant leap forward in radar technology, integrating state-of-the-art features to meet the demands of modern warfare.

One of the EK111's main features is its multi-functional capability, enabling it to execute various roles such as air-to-air and air-to-ground missions. This versatility makes it suitable for a wide range of platforms, including combat aircraft and unmanned aerial vehicles (UAVs). The radar operates in the X-band frequency, allowing it to achieve high resolution while maintaining a robust performance in diverse environmental conditions.

The EK111 employs advanced phased array technology, which provides rapid beam steering and real-time tracking of multiple targets simultaneously. This technology enhances the system's ability to detect and classify both stationary and moving targets, making it invaluable for tactical operations. The radar's electronic warfare capabilities include jam-resistant features, ensuring operational effectiveness in contested environments.

Another notable characteristic of the EK111 is its integrated signal processing algorithms, which greatly enhance target identification and tracking accuracy. This feature allows operators to filter out noise and clutter, resulting in a clearer picture of the operational environment. The system also includes automatic target recognition capabilities, further streamlining the decision-making process for military personnel.

In addition to its impressive detection capabilities, the EK111 demonstrates a remarkable range, allowing it to engage targets at long distances while maintaining a high degree of precision. This long-range capability is complemented by the radar's low probability of intercept, providing an added layer of security for the platform it is mounted on.

The Elta EK111 is designed with user-friendly interfaces and advanced situational awareness tools, ensuring that operators can make informed decisions quickly and effectively. Its modular architecture facilitates upgrades and integration with other systems, ensuring longevity and adaptability in an ever-evolving technological landscape.

In summary, the Elta EK111 is a sophisticated radar system that embodies cutting-edge technologies and features. Its multi-functional capabilities, advanced phased array technology, and superior signal processing make it an essential asset for modern military operations, providing nations with a crucial edge in surveillance and tactical engagements.