Before Requesting Service
THESE THINGS ARE NORMAL | |
The oven causes | Some radio and TV interference might occur when you cook with the |
interference with my TV. | microwave oven. This interference is similar to the interference caused |
| by small appliances such as mixers, vacuums, hair dryers, etc. It does |
| not indicate a problem with your oven. |
Steam accumulates | During cooking, steam and warm air are given off from the food. Most |
on the oven door and warm | of the steam and warm air are removed from the oven by the air which |
air comes from the oven | circulates in the oven cavity. However, some steam will condense on |
vents. | cooler surfaces such as the oven door. This is normal. |
I accidentally ran my | Running the oven empty for a short time will not damage the oven. |
microwave oven without | However, we do not recommend this. |
any food in it. |
|
PROBLEM
POSSIBLE CAUSE | REMEDY |
Oven will not turn on.
The oven is not plugged in securely.
Circuit breaker or fuse is tripped or blown.
There is a problem with the outlet.
Remove plug from outlet, wait 10 seconds and
Reset circuit breaker or replace fuse.
Plug another appliance into the outlet to check if the outlet is working.
Oven will not start cooking.
The door is not closed completely. Close the oven door securely.
Start Pad was not pressed after | Press Start Pad. |
programming |
|
Another program has already been | Press Stop/Reset Pad to cancel |
entered into the oven. | the previous program and |
| program again. |
The program has not been entered | Program again according to the |
correctly. | Operating Instructions. |
Stop/Reset Pad has been pressed Program oven again. accidentally.
When the oven is turning on, there is noise coming from Glass Tray.
The word “Child” appears in the Display
Window.
“H97”, “H98” or “H00”, appears in the display
window.
The roller ring and oven bottom | Clean these parts according |
are dirty. | to care of your oven (See next |
| page). |
The Child Lock was activated by | Deactivate Lock by pressing |
pressing Start Pad 3 times. | Stop/Reset Pad 3 times. |
The display indicates a problem | Contact the specified service |
with microwave generation system. | centre. |
If it seems there is a problem with the oven, contact an authorized Service Centre.
– 16 –