Miele H 5981 BP installation instructions Evaporate residual moisture, Descaling

Page 44

Moisture plus

Evaporate residual moisture

If there is still water in the steam injection system at the end of a programme or if the programme is cancelled, you will be prompted to evaporate the residual moisture.

If you confirm the prompt immediately with OK, the oven will heat up to approx. 150 °C and the residual water will evaporate.

How long this takes will depend on the amount of water in the system.

If you select "Cancel", the evaporation of the residual water will not start imme- diately.

However, you will then only be able to run functions and Automatic programmes without Moisture plus.

The evaporation of the residual water process must be carried out before you can use an Automatic programme with Moisture plus or the Moisture plus function.

Descaling

The oven will need to be descaled depending on the number of cooking programmes using Moisture plus which have been run and the amount of water taken into the oven for these.

The frequency of descaling also depends on the water hardness level in your area.

A message to tell you to descale the appliance will appear in the display.

You can start the descaling process at any time by selecting "Descale" in the main menu.

If you do not carry out the descaling process when the prompt to descale the oven appears, you will only be able to run functions and Automatic programmes without Moisture plus.

See "Cleaning and care" for more information about descaling.

44

Image 44

Contents Operating and installation instructions Oven 5981 BP Contents Contents Contents Safety with children Correct applicationTechnical safety Correct use Page Accessories Disposing of your old appliance Caring for the environmentDisposal of the packing material Guide to the appliance 5981 BPFeatures Safety featuresOven controls SpeedLight illuminationPyrolytic cleaning PerfectClean treated surfacesMoisture plus Auto sensorDoor contact switch Vented oven doorMoisture plus recipe booklet Energy efficiency rating according to ENUniversal tray and rack with anti-tip safety notches FlexiClip telescopic runners RunnersFood probe RotisserieOpener Descaling tablets Plastic tube with clipOptional accessories Miele@homeInformation is displayed via Home of the futureMeaning ControlsSensors Display Main menuSymbols Symbol MeaningDuration Functions Function Full grill Economy grillFan grill DefrostBefore using for the first time To enter the basic settingsCleaning and heating up for the first time Calibration of the Auto sensorOperation Automatic programmesChange SpeedLight during the heating-up phaseManual operation Recommended temperature, Selecting the temperature Selecting a functionStart time R Finish S Entering the duration, start time or finishDuration T At the end of the cooking programme Changing or deleting an entered cooking timeChanging the heating-up phase Pre-heating the ovenWith Fan plus With Conventional heatActivating moisture reduction Change functionUser programmes User programmes menuTo create a User programme Food probe How the food probe worksAvoid Important notes about using the food probeApplications To use the food probe Time left displayUsing the residual heat, Energy save function When the core temperature selected has been reachedMoisture plus Night baking Number of bursts of steam and when they are injected Moisture plus function dInjecting bursts of steam manually Using Moisture plus dAutomatic burst of steam Evaporate residual moisture DescalingTo set the minute minder Minute minder egg timer NTo cancel the time set for the minute minder Settings Language JTime DisplayCooling fan run-on LightingCatalyser Heating-up phase Recommended temperaturesPyrolytic StartSpeedLight VolumeSafety Factory default To switch the system lock on or offUnits Showroom programmeCleaning and care Appliance frontRack, runners When cleaning the runners, do not useUniversal tray Lubricating the FlexiClip telescopic runners Normal soilingHeavy soiling Stubborn soiling PerfectCleanUsing oven sprays on very stubborn soiling Cleaning and care Oven interior Manual cleaning of the oven interiorPyrolytic cleaning of the oven interior Starting a pyrolytic process Pyrolytic process will be cancelled To remove the oven door Open the door fullyTo dismantle the oven door Cleaning and care Cleaning and care Cleaning and care To refit the door To remove the side runners Refit the runners carefully as described in FeaturesTo remove the FlexiClip telescopic runners To lower the top heat/grill element Remove the runnersCleaning and care Cleaning and care Light in the roof Problem solving guideProblem Possible cause and remedy Light in the side wall Problem solving guide With Fan plus UFor all other fault codes please contact the Miele Ser Vice DepartmentAfter sales service Optional accessories FlexiClip telescopic runners Anti-splash trayUniveral tray, Rack Flan/Pizza dishChild safety lock Oven cleanerGourmet oven dish Gourmet oven dish lidElectrical connection Important U.KInstallation in a base unit Building-in diagramsAppliance dimensions and unit cut-out Installation in a tall unit Front dimensions Installing the oven Page Page Page Alteration rights reserved / 22 Nr 293 000 5981 BP