Miele H 5981 BP Normal soiling, Heavy soiling, Lubricating the FlexiClip telescopic runners

Page 53

Cleaning and care

Normal soiling

Clean the surfaces of the runners using a damp Miele microfibre E-Cloth or with a clean sponge and a solution of hot water and washing-up liquid. Wipe dry using a soft cloth.

Remove any cleaning agent residues thoroughly.

Heavy soiling

If necessary, the scouring pad on the reverse of a non-stick washing-up sponge can be used to clean the runners. Cleaning may be easier if the soiling is first dampened with a solution of hot water and washing-up liquid for a few minutes. If necessary, a non-abrasive stainless steel spiral pad can be used.

For very heavy soiling the telescopic runners can be soaked in a solution of hot water and washing-up liquid for a maximum of 10 minutes.

Oven cleaning sprays can be used if absolutely necessary. However, only use them on cold surfaces, and only allow the spray to be in contact with surfaces for a few minutes at the most. Be careful to avoid getting oven spray inside the runners.

Any residual oven spray left on the FlexiClip runners could give off an unpleasant smell when they are heated.

The runners may appear discoloured or a lighter colour in places after they have been cleaned. This will not affect the functioning of the runners in any way.

Note:

When baking cakes with moist toppings or fillings e.g. fruit crumble, be careful not to let them spill over. Should this happen there is a danger of sticky fruit juices adhering to the runners and hindering or even preventing their movement in and out of the oven. Clean the runners as described above and very carefully use a soft nylon brush to clean the bearings inside the runners.

Lubricating the FlexiClip telescopic runners

If the lubrication on the telescopic runners dries out, they can be relubricated to ensure they continue to run smoothly.

A special lubricant is available from Miele.

Only use this special lubricant, as it is designed to withstand high temperatures in the oven.

Other lubricants can harden and stick to the telescopic runners when they are heated.

53

Image 53
Contents Operating and installation instructions Oven 5981 BP Contents Contents Contents Correct application Safety with childrenTechnical safety Correct use Page Accessories Disposing of your old appliance Caring for the environmentDisposal of the packing material 5981 BP Guide to the applianceSafety features FeaturesOven controls SpeedLight illuminationPerfectClean treated surfaces Pyrolytic cleaningMoisture plus Auto sensorVented oven door Door contact switchMoisture plus recipe booklet Energy efficiency rating according to ENUniversal tray and rack with anti-tip safety notches Runners FlexiClip telescopic runnersRotisserie Food probeOpener Descaling tablets Plastic tube with clipMiele@home Optional accessoriesInformation is displayed via Home of the futureMeaning ControlsSensors Main menu DisplaySymbol Meaning SymbolsDuration Functions Economy grill Function Full grillFan grill DefrostTo enter the basic settings Before using for the first timeCalibration of the Auto sensor Cleaning and heating up for the first timeAutomatic programmes OperationChange SpeedLight during the heating-up phaseManual operation Selecting a function Recommended temperature, Selecting the temperatureStart time R Finish S Entering the duration, start time or finishDuration T Changing or deleting an entered cooking time At the end of the cooking programmePre-heating the oven Changing the heating-up phaseWith Fan plus With Conventional heatChange function Activating moisture reductionUser programmes menu User programmesTo create a User programme How the food probe works Food probeAvoid Important notes about using the food probeApplications Time left display To use the food probeWhen the core temperature selected has been reached Using the residual heat, Energy save functionMoisture plus Night baking Moisture plus function d Number of bursts of steam and when they are injectedInjecting bursts of steam manually Using Moisture plus dAutomatic burst of steam Descaling Evaporate residual moistureTo set the minute minder Minute minder egg timer NTo cancel the time set for the minute minder Language J SettingsTime DisplayCooling fan run-on LightingCatalyser Recommended temperatures Heating-up phasePyrolytic StartSpeedLight VolumeSafety To switch the system lock on or off Factory defaultUnits Showroom programmeAppliance front Cleaning and careRack, runners When cleaning the runners, do not useUniversal tray Lubricating the FlexiClip telescopic runners Normal soilingHeavy soiling Stubborn soiling PerfectCleanUsing oven sprays on very stubborn soiling Cleaning and care Oven interior Manual cleaning of the oven interiorPyrolytic cleaning of the oven interior Starting a pyrolytic process Pyrolytic process will be cancelled Open the door fully To remove the oven doorTo dismantle the oven door Cleaning and care Cleaning and care Cleaning and care To refit the door To remove the side runners Refit the runners carefully as described in FeaturesTo remove the FlexiClip telescopic runners Remove the runners To lower the top heat/grill elementCleaning and care Cleaning and care Light in the roof Problem solving guideProblem Possible cause and remedy Light in the side wall With Fan plus U Problem solving guideVice Department For all other fault codes please contact the Miele SerAfter sales service FlexiClip telescopic runners Anti-splash tray Optional accessoriesUniveral tray, Rack Flan/Pizza dishOven cleaner Child safety lockGourmet oven dish Gourmet oven dish lidImportant U.K Electrical connectionInstallation in a base unit Building-in diagramsAppliance dimensions and unit cut-out Installation in a tall unit Front dimensions Installing the oven Page Page Page Alteration rights reserved / 22 Nr 293 000 5981 BP