Miele H 5981 BP installation instructions Electrical connection, Important U.K

Page 76

Electrical connection

All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

Ensure power is not supplied to the appliance until after installation or repair work has been carried out.

The voltage and connected load are given on the data plate, visible below the oven interior, with the door open.

Ensure that these match the household mains supply. Please quote these data, and the model and serial number when contacting Miele.

Connection of this appliance should be made via a fused connection unit or a suitable isolator, which complies with national and local safety regulations, and the on/off switch should be easily accessible after the appliance has been built in.

If the switch is not accessible after installation (depending on country) an additional means of disconnection must be provided for all poles.

For extra safety it is advisable to install a residual current device (RCD). Please contact a qualified electrician for advice.

When switched off there must be an all-pole contact gap of 3 mm in the

isolator switch (including switch, fuses and relays acc. to EN 60 335).

Important U.K.

The appliance is supplied for connection to a 230-240 V, 50 Hz supply with a 3-core cable.

The wires in the mains lead are coloured in accordance with the following code:

Green/yellow = earth

Blue = neutral

Brown = live

WARNING

THIS APPLIANCE MUST BE EARTHED

When replacing the cable supplied with another cable or changing the connection, only cable type

H 05 V2V2-F with a suitable cross- sectional area (CSA) may be used (available from Miele Spare Parts).

76

Image 76

Contents Operating and installation instructions Oven 5981 BP Contents Contents Contents Safety with children Correct applicationTechnical safety Correct use Page Accessories Disposal of the packing material Caring for the environmentDisposing of your old appliance Guide to the appliance 5981 BPFeatures Safety featuresOven controls SpeedLight illuminationPyrolytic cleaning PerfectClean treated surfacesMoisture plus Auto sensorDoor contact switch Vented oven doorMoisture plus recipe booklet Energy efficiency rating according to ENUniversal tray and rack with anti-tip safety notches FlexiClip telescopic runners RunnersFood probe RotisserieOpener Descaling tablets Plastic tube with clipOptional accessories Miele@homeInformation is displayed via Home of the futureSensors ControlsMeaning Display Main menuSymbols Symbol MeaningDuration Functions Function Full grill Economy grillFan grill DefrostBefore using for the first time To enter the basic settingsCleaning and heating up for the first time Calibration of the Auto sensorOperation Automatic programmesManual operation SpeedLight during the heating-up phaseChange Recommended temperature, Selecting the temperature Selecting a functionDuration T Entering the duration, start time or finishStart time R Finish S At the end of the cooking programme Changing or deleting an entered cooking timeChanging the heating-up phase Pre-heating the ovenWith Fan plus With Conventional heatActivating moisture reduction Change functionUser programmes User programmes menuTo create a User programme Food probe How the food probe worksApplications Important notes about using the food probeAvoid To use the food probe Time left displayUsing the residual heat, Energy save function When the core temperature selected has been reachedMoisture plus Night baking Number of bursts of steam and when they are injected Moisture plus function dAutomatic burst of steam Using Moisture plus dInjecting bursts of steam manually Evaporate residual moisture DescalingTo cancel the time set for the minute minder Minute minder egg timer NTo set the minute minder Settings Language JTime DisplayCatalyser LightingCooling fan run-on Heating-up phase Recommended temperaturesPyrolytic StartSafety VolumeSpeedLight Factory default To switch the system lock on or offUnits Showroom programmeCleaning and care Appliance frontUniversal tray When cleaning the runners, do not useRack, runners Heavy soiling Normal soilingLubricating the FlexiClip telescopic runners Using oven sprays on very stubborn soiling PerfectCleanStubborn soiling Cleaning and care Pyrolytic cleaning of the oven interior Manual cleaning of the oven interiorOven interior Starting a pyrolytic process Pyrolytic process will be cancelled To remove the oven door Open the door fullyTo dismantle the oven door Cleaning and care Cleaning and care Cleaning and care To refit the door To remove the FlexiClip telescopic runners Refit the runners carefully as described in FeaturesTo remove the side runners To lower the top heat/grill element Remove the runnersCleaning and care Cleaning and care Problem Possible cause and remedy Problem solving guideLight in the roof Light in the side wall Problem solving guide With Fan plus UFor all other fault codes please contact the Miele Ser Vice DepartmentAfter sales service Optional accessories FlexiClip telescopic runners Anti-splash trayUniveral tray, Rack Flan/Pizza dishChild safety lock Oven cleanerGourmet oven dish Gourmet oven dish lidElectrical connection Important U.KAppliance dimensions and unit cut-out Building-in diagramsInstallation in a base unit Installation in a tall unit Front dimensions Installing the oven Page Page Page Alteration rights reserved / 22 Nr 293 000 5981 BP