Miele H 5981 BP installation instructions Pyrolytic process will be cancelled

Page 58

Cleaning and care

After the pyrolytic process any debris (e.g, ash), can easily be wiped away.

Remember to wait until the oven has cooled down before doing so! Danger of burning.

Try not to wipe over the fibre-glass seal when cleaning the oven cavity. It is particularly sensitive and should not be cleaned unless absolutely necessary. Rubbing it can damage it.

Most residues are easily wiped away with a damp cloth.

Depending on soiling levels in the oven there may be visible deposits on the door and below the trim under the oven cavity. This is best removed using a non-abrasive sponge or non-abrasive stainless steel spiral pad and a mild solution of warm water and washing-up liquid.

Deposits on the internal door panel can be removed using a suitable glass scraper.

Spilt fruit juices may cause lasting discolouration to the surfaces. This discolouration is permanent but will not affect the efficiency of the enamel. Do not attempt to remove these marks.

The pyrolytic process will be cancelled,

–if the oven is switched off.

–if another function is selected during the pyrolytic process.

–in the event of a power cut.

Switch the oven off if either of these last two points apply.

If the oven interior temperature is below 280 °C, the door lock will be released after a short while. It can then be opened.

Start the pyrolytic cleaning process again if necessary.

58

Image 58

Contents Operating and installation instructions Oven 5981 BP Contents Contents Contents Safety with children Correct applicationTechnical safety Correct use Page Accessories Disposal of the packing material Caring for the environmentDisposing of your old appliance Guide to the appliance 5981 BPOven controls FeaturesSafety features SpeedLight illuminationMoisture plus Pyrolytic cleaningPerfectClean treated surfaces Auto sensorMoisture plus recipe booklet Door contact switchVented oven door Energy efficiency rating according to ENUniversal tray and rack with anti-tip safety notches FlexiClip telescopic runners RunnersOpener Food probeRotisserie Descaling tablets Plastic tube with clipInformation is displayed via Optional accessoriesMiele@home Home of the futureSensors ControlsMeaning Display Main menuSymbols Symbol MeaningDuration Functions Fan grill Function Full grillEconomy grill DefrostBefore using for the first time To enter the basic settingsCleaning and heating up for the first time Calibration of the Auto sensorOperation Automatic programmesManual operation SpeedLight during the heating-up phaseChange Recommended temperature, Selecting the temperature Selecting a functionDuration T Entering the duration, start time or finishStart time R Finish S At the end of the cooking programme Changing or deleting an entered cooking timeWith Fan plus Changing the heating-up phasePre-heating the oven With Conventional heatActivating moisture reduction Change functionUser programmes User programmes menuTo create a User programme Food probe How the food probe worksApplications Important notes about using the food probeAvoid To use the food probe Time left displayUsing the residual heat, Energy save function When the core temperature selected has been reachedMoisture plus Night baking Number of bursts of steam and when they are injected Moisture plus function dAutomatic burst of steam Using Moisture plus dInjecting bursts of steam manually Evaporate residual moisture DescalingTo cancel the time set for the minute minder Minute minder egg timer NTo set the minute minder Time SettingsLanguage J DisplayCatalyser LightingCooling fan run-on Pyrolytic Heating-up phaseRecommended temperatures StartSafety VolumeSpeedLight Units Factory defaultTo switch the system lock on or off Showroom programmeCleaning and care Appliance frontUniversal tray When cleaning the runners, do not useRack, runners Heavy soiling Normal soilingLubricating the FlexiClip telescopic runners Using oven sprays on very stubborn soiling PerfectCleanStubborn soiling Cleaning and care Pyrolytic cleaning of the oven interior Manual cleaning of the oven interiorOven interior Starting a pyrolytic process Pyrolytic process will be cancelled To remove the oven door Open the door fullyTo dismantle the oven door Cleaning and care Cleaning and care Cleaning and care To refit the door To remove the FlexiClip telescopic runners Refit the runners carefully as described in FeaturesTo remove the side runners To lower the top heat/grill element Remove the runnersCleaning and care Cleaning and care Problem Possible cause and remedy Problem solving guideLight in the roof Light in the side wall Problem solving guide With Fan plus UFor all other fault codes please contact the Miele Ser Vice DepartmentAfter sales service Univeral tray, Rack Optional accessoriesFlexiClip telescopic runners Anti-splash tray Flan/Pizza dishGourmet oven dish Child safety lockOven cleaner Gourmet oven dish lidElectrical connection Important U.KAppliance dimensions and unit cut-out Building-in diagramsInstallation in a base unit Installation in a tall unit Front dimensions Installing the oven Page Page Page Alteration rights reserved / 22 Nr 293 000 5981 BP