Cleaning and care
Allow the PerfectClean surfaces to cool down to room temperature before applying an oven spray.
Apply a spray oven cleaner to the soiled areas. Leave to take effect for a couple of minutes only!
If necessary use a soft sponge, soft nylon brush or a scraper suitable for glass surfaces to loosen the soiling.
Repeat the process if necessary.
After cleaning, rinse thoroughly with clean water and then dry thoroughly.
For optimum performance of PerfectClean enamel it is important to clean the oven and accessories after each use.
The surfaces will become harder to clean and the
The following cause lasting damage to the surface structure and reduce the
–abrasive cleaning agents, e.g. powder cleaners and cream cleaners,
–cleaning agents for ceramic hobs,
–wire wool or metal scourers,
–abrasive sponges, e.g. pot scourers or sponges which have been previously used with abrasive cleaning agents,
–oven spray must not be used in a hot oven or left on for too long,
–PerfectClean enamelled items must not be washed in a dishwasher.
Note:
–Soiling such as spilt juices and cake mixtures are best removed whilst the oven or tray is still warm. Excercise caution and make sure the oven is not too hot - danger of burning.
–Spilt fruit juices may cause lasting discolouration to the surfaces. and roasting can cause matt areas to appear. Clean these following the instructions given above and do not use force to remove them. This discolouration is permanent but will not affect the efficiency of the enamel.
55