Miele H 5981 BP SpeedLight during the heating-up phase, Manual operation, Change

Page 28

Operation

SpeedLight during the heating-up phase

As soon as the oven is started, the SpeedLight lights up yellow. The rising temperature is shown by the change in the colour of the light from yellow via orange to red.

When the required temperature is reached, the SpeedLight turns red. As soon as the temperature drops below the set temperature, the colour of the light changes accordingly.

You can change the default setting for this (see "Settings - SpeedLight").

Manual operation

If you do not want to use an Automatic programme you can enter the settings for a cooking programme manually.

^Place the food in the oven.

^Switch the oven on with the K sensor.

^Select the required function and set the temperature.

The oven will start heating, and the cooling fans will switch on.

At the end of the cooking programme:

^Switch the oven off and remove the food.

Cooling fans

The cooling fans will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit.

The fans are sensor-controlled, and will switch off automatically.

You can change this standard default setting. See "Settings - Cooling fan run-on".

Change

Selecting "Change" brings up all the options which can be changed, e.g. the selected temperature.

28

Image 28

Contents Operating and installation instructions Oven 5981 BP Contents Contents Contents Safety with children Correct applicationTechnical safety Correct use Page Accessories Disposal of the packing material Caring for the environmentDisposing of your old appliance Guide to the appliance 5981 BPFeatures Safety featuresOven controls SpeedLight illuminationPyrolytic cleaning PerfectClean treated surfacesMoisture plus Auto sensorDoor contact switch Vented oven doorMoisture plus recipe booklet Energy efficiency rating according to ENUniversal tray and rack with anti-tip safety notches FlexiClip telescopic runners RunnersFood probe RotisserieOpener Descaling tablets Plastic tube with clipOptional accessories Miele@homeInformation is displayed via Home of the futureSensors ControlsMeaning Display Main menuSymbols Symbol MeaningDuration Functions Function Full grill Economy grillFan grill DefrostBefore using for the first time To enter the basic settingsCleaning and heating up for the first time Calibration of the Auto sensorOperation Automatic programmesManual operation SpeedLight during the heating-up phaseChange Recommended temperature, Selecting the temperature Selecting a functionDuration T Entering the duration, start time or finishStart time R Finish S At the end of the cooking programme Changing or deleting an entered cooking timeChanging the heating-up phase Pre-heating the ovenWith Fan plus With Conventional heatActivating moisture reduction Change functionUser programmes User programmes menuTo create a User programme Food probe How the food probe worksApplications Important notes about using the food probeAvoid To use the food probe Time left displayUsing the residual heat, Energy save function When the core temperature selected has been reachedMoisture plus Night baking Number of bursts of steam and when they are injected Moisture plus function dAutomatic burst of steam Using Moisture plus dInjecting bursts of steam manually Evaporate residual moisture DescalingTo cancel the time set for the minute minder Minute minder egg timer NTo set the minute minder Settings Language JTime DisplayCatalyser LightingCooling fan run-on Heating-up phase Recommended temperaturesPyrolytic StartSafety VolumeSpeedLight Factory default To switch the system lock on or offUnits Showroom programmeCleaning and care Appliance frontUniversal tray When cleaning the runners, do not useRack, runners Heavy soiling Normal soilingLubricating the FlexiClip telescopic runners Using oven sprays on very stubborn soiling PerfectCleanStubborn soiling Cleaning and care Pyrolytic cleaning of the oven interior Manual cleaning of the oven interiorOven interior Starting a pyrolytic process Pyrolytic process will be cancelled To remove the oven door Open the door fullyTo dismantle the oven door Cleaning and care Cleaning and care Cleaning and care To refit the door To remove the FlexiClip telescopic runners Refit the runners carefully as described in FeaturesTo remove the side runners To lower the top heat/grill element Remove the runnersCleaning and care Cleaning and care Problem Possible cause and remedy Problem solving guideLight in the roof Light in the side wall Problem solving guide With Fan plus UFor all other fault codes please contact the Miele Ser Vice DepartmentAfter sales service Optional accessories FlexiClip telescopic runners Anti-splash trayUniveral tray, Rack Flan/Pizza dishChild safety lock Oven cleanerGourmet oven dish Gourmet oven dish lidElectrical connection Important U.KAppliance dimensions and unit cut-out Building-in diagramsInstallation in a base unit Installation in a tall unit Front dimensions Installing the oven Page Page Page Alteration rights reserved / 22 Nr 293 000 5981 BP