Miele H 5981 BP installation instructions Technical safety

Page 6

Warning and Safety instructions

Technical safety

~Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

~Before installation, check the appliance for visible signs of damage. Do not install and use a damaged appliance. A damaged appliance could be dangerous.

~The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system. It is most important that this basic safety requirement is present and tested regularly, and where there is any doubt the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

~Before connecting the appliance, make sure that the connection data on the data plate (voltage and connected load) match the mains electricity supply.

This data must correspond in order to avoid the risk of damage to the appliance. Consult a competent person if in doubt.

~Do not connect the appliance to the mains electricity supply by a multi-socket unit or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating).

~For safety reasons, this appliance may only be used when it has been built in.

~Never open the housing of the appliance.

Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults.

~While the appliance is under guarantee, repairs should only be undertaken by a service technician authorised by the manufacturer. Otherwise the guarantee will be invalidated.

6

Image 6

Contents Operating and installation instructions Oven 5981 BP Contents Contents Contents Safety with children Correct applicationTechnical safety Correct use Page Accessories Caring for the environment Disposal of the packing materialDisposing of your old appliance Guide to the appliance 5981 BPOven controls FeaturesSafety features SpeedLight illuminationMoisture plus Pyrolytic cleaningPerfectClean treated surfaces Auto sensorMoisture plus recipe booklet Door contact switchVented oven door Energy efficiency rating according to ENUniversal tray and rack with anti-tip safety notches FlexiClip telescopic runners RunnersOpener Food probeRotisserie Descaling tablets Plastic tube with clipInformation is displayed via Optional accessoriesMiele@home Home of the futureControls SensorsMeaning Display Main menuSymbols Symbol MeaningDuration Functions Fan grill Function Full grillEconomy grill DefrostBefore using for the first time To enter the basic settingsCleaning and heating up for the first time Calibration of the Auto sensorOperation Automatic programmesSpeedLight during the heating-up phase Manual operationChange Recommended temperature, Selecting the temperature Selecting a functionEntering the duration, start time or finish Duration TStart time R Finish S At the end of the cooking programme Changing or deleting an entered cooking timeWith Fan plus Changing the heating-up phasePre-heating the oven With Conventional heatActivating moisture reduction Change functionUser programmes User programmes menuTo create a User programme Food probe How the food probe worksImportant notes about using the food probe ApplicationsAvoid To use the food probe Time left displayUsing the residual heat, Energy save function When the core temperature selected has been reachedMoisture plus Night baking Number of bursts of steam and when they are injected Moisture plus function dUsing Moisture plus d Automatic burst of steamInjecting bursts of steam manually Evaporate residual moisture DescalingMinute minder egg timer N To cancel the time set for the minute minderTo set the minute minder Time SettingsLanguage J DisplayLighting CatalyserCooling fan run-on Pyrolytic Heating-up phaseRecommended temperatures StartVolume SafetySpeedLight Units Factory defaultTo switch the system lock on or off Showroom programmeCleaning and care Appliance frontWhen cleaning the runners, do not use Universal trayRack, runners Normal soiling Heavy soilingLubricating the FlexiClip telescopic runners PerfectClean Using oven sprays on very stubborn soilingStubborn soiling Cleaning and care Manual cleaning of the oven interior Pyrolytic cleaning of the oven interiorOven interior Starting a pyrolytic process Pyrolytic process will be cancelled To remove the oven door Open the door fullyTo dismantle the oven door Cleaning and care Cleaning and care Cleaning and care To refit the door Refit the runners carefully as described in Features To remove the FlexiClip telescopic runnersTo remove the side runners To lower the top heat/grill element Remove the runnersCleaning and care Cleaning and care Problem solving guide Problem Possible cause and remedyLight in the roof Light in the side wall Problem solving guide With Fan plus UFor all other fault codes please contact the Miele Ser Vice DepartmentAfter sales service Univeral tray, Rack Optional accessoriesFlexiClip telescopic runners Anti-splash tray Flan/Pizza dishGourmet oven dish Child safety lockOven cleaner Gourmet oven dish lidElectrical connection Important U.KBuilding-in diagrams Appliance dimensions and unit cut-outInstallation in a base unit Installation in a tall unit Front dimensions Installing the oven Page Page Page Alteration rights reserved / 22 Nr 293 000 5981 BP