Miele H 5981 BP installation instructions Problem solving guide, With Fan plus U

		Problem solving guide
Problem	Possible cause and remedy
Browning is uneven.	There will always be a slight unevenness. If browning is
	very uneven, check
	with Fan plus U:
	–	whether the temperature was set too high,
	–	whether the correct shelf level was used.
	with Conventional heat V:
	–	the colour and material of the baking tins being used.
		Light coloured, shiny, or thin walled tins are less suitable.
	–	whether the correct shelf level was used.
A fault code	You can rectify the following fault codes yourself:
appears in the	–	F 23: The pyrolytic temperature of approx. 460 °C was
display (F +		not reached.
numbers), and a		This could have been caused by too much soiling in the
polyphonic tune		oven to start with.
plays.		Remove all coarse soiling before starting the pyrolytic
		cleaning programme again.
		If the fault code appears again please contact the Miele
		Service Department.
	–	F 32: The door has not locked.
		Interrupt the pyrolytic cleaning programme by switching
		the oven off. Then start the pyrolytic programme again.
		If the fault code appears again call the Miele Service
		Department.
	–	F 33: The door lock for the pyrolytic cleaning programme
		will not open.
		Interrupt the pyrolytic cleaning programme by switching
		the oven off. If the door lock will still not open please
		contact the Miele Service Department.

71