Cleaning and care
Accessories | FlexiClip telescopic runners |
Remove all accessories as well as the runners and accessories such as FlexiClip runners from the oven interior before starting the pyrolytic cleaning process. The high temperatures needed for pyrolysis will damage the accessories, and the damage to the FlexiClip runners could be irreparable.
Universal tray
The surface has been treated with PerfectClean enamel.
Please refer to the section on "PerfectClean" for information on cleaning and care.
Rack, runners
The surface has been treated with PerfectClean enamel.
Treat in the same way as other surfaces coated with PerfectClean. See "PerfectClean".
Food probe
The food probe is
Rotisserie
Wash in hot water with a little
If necessary a
Do not clean FlexiClip telescopic runners in a dishwasher. This would remove the special lubricant.
When cleaning the runners, do not use:
–abrasive cleaning agents, e.g. powder cleaners and cream cleaners,
–stainless steel cleaning agents,
–hard, abrasive sponges and brushes, e.g. pot scourers,
When cleaning the runners be very careful not to wash out the special lubricant in them.
Avoid frequent:
–soaking in hot soapy water,
–use of oven spray,
–cleaning of the bearings.
FlexiClip telescopic runners are best cleaned after each use.
This prevents soiling drying on or being burnt on when the oven is used again.
If the runners are used frequently without being cleaned, it may become very difficult or even impossible to clean them.
52