Before using for the first time
Setting up the appliance
The steam oven will switch on automatically when it is connected to the electricity supply.
A welcome screen will appear in the display and you will then be requested to select some basic settings which are needed to set up the appliance up for using for the first time.
Follow the instructions in the display.
The welcome screen will be replaced by the request to set a language:
^Touch one of the sensors next to the arrows until the language you want appears in the display.
^Touch the sensor to the left hand side of the language you want.
A tick L will appear beside the language you have selected.
^Confirm your selection by touching the sensor next to "Continue" (the lowest of the three sensors beside the display on the right hand side).
The request to select a Clock format will appear. The default setting for the clock is 24 h.
^Touch the sensor next to the clock format you want.
^Touch the sensor next to "Continue" to confirm your selection.
You will then be requested to set the Time.
You can either use the sensors next to + and - or the numerical keypad to enter the time.
^Enter the hour and confirm with "Continue".
^Then enter the minutes and confirm with "Continue".
If you are using the keypad to enter the time you can enter the minutes immedi- ately after entering the hour.
You will then be asked if you want the display to Always show the time or for the time of day to be displayed only when the appliance is switched on.
^Select the option you want.
After you have confirmed your selection with "Continue", the display will show messages to tell you that:
–your appliance is Mielehome enabled.
–setting up for using for the first time has been successfully completed.
Your steam oven is ready for use as soon as you confirm the last message with "OK".
16