Installation
Electrical connection
All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK).
Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
Ensure power is not supplied to the appliance until after installation work has been carried out.
The appliance must only be operated when
Do not connect the appliance to the mains electricity supply via an extension lead. These do not guarantee the required safety of the appliance.
Please ensure that the connection data quoted on the data plate match the household mains supply.
Connection should be made via a suitable isolator or a double pole fused spur connection unit or fused plug and switched socket which complies with national and local safety regulations and the on/off switch should be easily accessible after the appliance has been built in.
If the switch is not accessible after installation (depending on country) an additional means of disconnection must be provided for all poles.
For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA.
When switched off there must be an
Important U.K.
This appliance is supplied for connection to a single phase
The wires in the mains lead are coloured in accordance with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
WARNING: THIS APPLIANCE MUST BE EARTHED
58