GE r08654v-1 installation instructions Approved to be installed under

Installation Instructions

A

Cutout for 30″ (76.2 cm) Single Built-In Ovens only Under Counter

For JTP30, JTP70, PT916, PT920, ZET938 models only.

Gas or electric cooktops may be installed over this oven. See
cooktop installation instructions for cutout size. See label on		240V / 208V
top of oven for approved cooktop models.
		Junction Box
		Location (junction
		box may be in
		adjacent cabinet)
25	” (63.5 cm)		9	1/2”	Gas and electrical connections
			(24.1 cm)		for gas cooktop must be located
					in an adjacent accessible
			Max.
					location to the right.

Top and/or side fillers
may be necessary
if unit is positioned
between existing		28 1/2” (72.4 cm) Min.
cabinets. Be sure
they are attached		28 5/8” (72.7 cm) Max.
			Allow 1” (2.5 cm)
securely, since they
			overlap top				36” (91.4	cm)
will anchor the oven				22” (55.9 cm) Min.
			of oven,
in the cabinet.				Above Support			Typical
	27 1/4” (69.2 cm) Min.		11/16” (1.8 cm)				Countertop
				Platform
	27 5/16” (69.4 cm) Max.		overlap side edges				Height
			of cutout and
			1 1/4” (3.2 cm)
			overlap bottom
			of oven.
					24” (61	cm)

		4” (10.2 cm)
		Typical
3/4” (1.9 cm)		Toekick
Support Platform	Must
Required
	match	NOTE: This oven is only
	toekick
		approved to be installed under
	height
		the specific models as labeled
MUST SUPPORT 150 LBS. (68 Kg)		on this unit.

Side by Side Installations

Install two wall ovens in separate cutouts. Allow 2″ (5.1 cm) min. between cutouts.

Cutout –

Observe all dimensions and requirements.

2″ (5.1 cm)

Min.

Cutout –

Observe all dimensions and requirements.

11