Installation Instructions
A
Cutout for 30″ (76.2 cm) Single Built-In
Ovens only
For JTP30, JTP70, PT916, PT920, ZET938 models only.
| Cutout | 9 1/2” (24.1 cm) | |
| Width | Max. | Junction Box |
| 28 1/2” (72.4 cm) |
| Location |
| Min. |
| (junction box |
| 28 5/8” (72.7 cm) |
| may be |
| Max. |
| located in |
|
|
| adjacent |
Allow 11/16” |
|
| cabinet) |
(1.75 cm) for |
|
|
|
overlap of oven |
|
|
|
over side edges |
|
|
|
of cutout | Opening | Cutout |
|
| Between |
| |
| Height |
| |
| Inside Walls |
| |
| 27 1/4” | 22” (55.9 cm) | |
| Must Be | ||
| (69.2 cm) Min. | Min. to | |
| At Least | ||
| 27 5/16” | Bottom of | |
| 28 1/2” | ||
| (69.4 cm) Max. | Junction Box | |
| (72.4 cm) | ||
|
|
| |
21” | Wide |
|
|
|
|
| |
(53.3 cm) |
|
|
|
|
| Recommended |
|
| Allow 1” (2.5 cm) | cutout location |
|
| minimum for | from floor 32 1/2” | |
| overlap of oven | (82.6 cm) |
|
Cabinet Width | 30” (76.2 cm) | |
Recommended |
|
|
Cutout Location |
|
|
from Floor | 32 | 1/2” (82.6 cm) |
Cutout Depth | 23 | 1/2” (59.7 cm) Min. |
Cutout Width | 28 | 1/2” (72.4 cm) Min. |
| 28 | 5/8” (72.7 cm) Max. |
Cutout Height | 27 | 1/4” (69.2 cm) Min. |
| 27 | 5/16” (69.4 cm) Max. |
NOTE: If the cabinet does
not have a front frame and the sides are less than 3/4” (1.9 cm) thick, shim both sides equally to establish the cutout width.
|
| top and 11⁄4” |
| ||
Allow a minimum | |||||
of 21” (53.3 cm) for |
| (3.2 cm) overlap |
| ||
clearance to adjacent |
| of oven bottom | |||
corners, drawers, |
|
| of cutout | ||
walls, etc. when |
|
| Cabinet |
| |
door is open | |||||
| Width |
| |||
|
| 30 | ” (76.2 cm) | ||
If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of the oven. For single ovens, the runners and braces must support 150 lbs (68 Kg).
Suitable
Bracing to Support Runners
C |
L |
2” x 4”
(5 cm x 10 cm) or equivalent runners level with bottom of cutout
NOTE: If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered.
215/8”
(54.9 cm) Over
Centerline of Cabinet
Side by Side Installations
Install two wall ovens in separate cutouts. Allow 2″ (5.1 cm) min. between cutouts.
These ovens are not approved for stackable installations.
Cutout – | 2″ (5.1 cm) |
Observe all | Min. |
dimensions |
|
and |
|
requirements. |
|
|
|
Cutout –
Observe all dimensions and requirements.
9