GE r08654v-1 installation instructions Cutout for 30″ 76.2 cm Double Built-In Ovens only

Installation Instructions

A

Cutout for 30″ (76.2 cm) Double Built-In Ovens only

For JTP35, JTP55, JTP75, PT956, PT960, ZET958 models only.

		Cutout	9 1/2”
		Width	(24.1 cm)		Junction Box
28	1/2” (72.4 cm)			Max.	Location
				5"
		Min.
					(junction box
28	5/8” (72.7 cm)
					may be
		Max.
					located in
					adjacent
					cabinet)

Cabinet Width	30” (76.2 cm)
Recommended
Cutout Location
from Floor	12” (30.5 cm)
Cutout Depth	23 1/2” (59.7 cm) Min.

Allow 11/16”			Cutout Width	28 1/2” (72.4 cm) Min.
(1.75 cm) for				28 5/8” (72.7 cm) Max.
overlap of oven
over side edges			Cutout Height	51 13/16” (131.6 cm) Min.
of cutout	Opening
	Between			51 15/16” (131.9 cm) Max.
	Inside Walls
	Must Be At	47” (119.4 cm)
Allow a minimum	Least 28 1/2”	Min.
	(72.4 cm) Wide	to Bottom of	NOTE: If the cabinet does not
of 21” (53.3 cm) for
clearance to adjacent		Junction Box	have a front frame and the sides
		Cutout
corners, drawers,	Allow 1” (2.5 cm)		are less than 3/4” (1.9 cm) thick,
walls, etc. when		Height
door is open	minimum for	51 13/16” 131.6 cm)	shim both sides equally to
	overlap of oven	Min.	establish the cutout width.
	top and 11⁄4”	51 15/16” (131.9 cm)
	(3.2 cm) overlap	Max.
	of oven bottom
	of cutout
21” (53.3 cm)

			C	2” x 4”
	Recommended		L	(5 cm x 10 cm)
30”	cutout location			or equivalent
(76.2 cm)	from floor 12” (30.5 cm)			runners level
Cabinet				with bottom
				of cutout
Width
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to		Suitable
support the weight of the oven. For		Bracing	21 5/8”
double ovens, the runners and braces		to Support
		Runners	(54.9 cm) Over
must support 275 lbs (124 Kg).
			Centerline
			of Cabinet

NOTE: If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered.

10