SURFACE COOKWARE TIPS
(Glass Cooktop models
How to Check Pan Performance
Use of correct cookware can affect the cooking performance and cleaning of your cooktop. The correct cookware reduces the temperature of the cooktop surface and minimizes the chance of spillovers burning onto the cooktop.
You must use pans with perfectly flat bottoms. Some pans may have curved or rounded bottoms or may be warped. If you are unsure of the flatness of your pans you may do this quick test.
Turn your pan upside
down on the countertop,
place a ruler flat against the pan surface. The
bottom of the pan and the straight edge of the ruler
should fit flush against each other all the way across. Turn the ruler a full 360 degrees, checking for any space between the ruler and the bottom of the pan.
Pans with rounded, curved, ridged or warped bottoms are not recommended.
Another simple test to determine even heat distribution across the cookware bottom is to put one inch of water in the pan. Bring the water to a boil and observe the location of bubbles as the water starts to boil. Good flat cookware will have an even distribution of bubbles over the bottom surface area of the pan. Bubbles localized in only a portion of the bottom indicate uneven contact of the pan to the surface unit, uneven heat transfer or an unsuitable pan.
Use pans that match the diameter of the surface unit. Cooking performance will not be as good if the cookware is either smaller or larger than the surface unit.
• Place only dry pans on the surface units. Do not place lids on the surface units, particularly wet lids.
• We recommend that you use only a
local retail store. The bottom of the wok should have the same diameter as the surface unit to insure proper contact.
• Do not use woks that have support rings. This type of wok will not heat on glass cooktops.
•Some special cooking procedures require specific cookware such as pressure cookers, deep fat fryers, etc. All cookware must have flat bottoms and be the correct size.
SPECIAL CAUTIONS FOR GLASS COOKTOPS
SURFACE
COOKING
OFF CENTER
•Never cook directly on the glass. Always use cookware.
•Always place the pan in the center of the surface unit you are cooking on.
CUTTING
DRAGGING
• Do not use the surface as a cutting board.
•Do not slide cookware
across the cooktop because it can scratch the
| • Don’t store heavy |
DROPPING | items above the |
| cooktop. If they |
| drop onto the |
| cooktop, they can |
| cause damage |
16