6To stop the tape, press STOP 9 on the set or remote
control.
9 again.• To reset the tape counter, press STOP
Note: The sound source cannot be changed while recording a cassette.
Switching cassette sides
The cassette side can be switched manually or automati- cally before or during tape playback.
•Press SHUFFLE SIDE A/B (SIDE/ ; or during playback only 2 on the remote control).
™The display shows SIDE A or SIDE B and the tape counter resets to 000,
Reverse mode options
•Press REPEAT REV MODE/BAND once or more to select your option:
å : playback stops at the end of the tape.
∂: both sides are played once.
∫ : both sides are played repeatedly, up to 5 times each side.
GENERAL INFORMATION ON RECORDING
•Recording is permissible insofar as copyright or other rights of third parties are not infringed.
•For recording, use only NORMAL (IEC type I) or CHROME (IEC I) type cassettes on which the tabs have not yet been broken.This deck is not suited for recording on or METAL (IEC IV) type cassettes.
•The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND, DBB or INTERACTIVE SOUND controls will not affect the recording in progress.
•At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads.
•To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape.
Synchro Start CD recording
1Select CD source.
2Insert a CD and if desired, program track numbers.
3Press OPEN to open the tape door.
4Insert a suitable tape into the deck and close the tape door.
5Press RECORD to start recording.
™COPY or RECORD is displayed briefly and RECORD is shown during recording
–Playing of the CD program starts automatically from the beginning of the CD/program after 7 seconds. It is not necessary to start the CD player separately.
–If you wish, press CLOCK once to monitor the counter display.
6To stop recording, press STOP 9.
English
15