Philips MC 148 manual Different play modes Shuffle and Repeat, Selecting a different track

5 To interrupt playback press PLAY•PAUSE 2; (on the

remote control SIDE/ ;). Press PLAY•PAUSE 2; (on the

remote control 2) again to resume play.

™ The display freezes and the elapsed playing time

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM.

STANDBY	M C	1	4 8	M I	C R O
ON						S Y S
							T E M
						CD	TIMER
					PROGRAM
SELECT

OP EN•CL OSE

PROGRAM

English

flashes when playback is interrupted.

6 To stop CD playback, press STOP 9.

Note: CD play will also stop when:

–the CD door is opened;

–the CD has reached the end;

–you select another source: TAPE, TUNER or AUX.

SHUFFLE . . . . . . . . . . tracks of the entire CD/ program are played in random order

SHUFFLE and

REPEAT ALL . . . . . . . . to repeat the entire CD/ program continuously in random order

REPEAT ALL . . . . . . . . repeats the entire CD/ program REPEAT . . . . . . . . . . . plays the current track continuously

SENIRSOR

REPEAT
RE	VM
B
ANDODE

DBB	DSC		VOLUME
			I
			SNUCREDIBLE
			RROUND
INTERACTIVE	SOUND
STOP		PRESET
			PLAY•
			PAUSE
TUNING		RECORD
PREV			TUNING
			NEXT

TIMER

ON • OFF

CLOCK

SHUFFLE SIDE A/B

Selecting a different track

•Press PREV ¡1 or NEXT 2™ on the set, (on the remote control ¡ or ™) once or repeatedly until the desired track number appears in the display.

•If you have selected a track number shortly after loading

a CD or in the PAUSE position, you will need to press PLAY•PAUSE 2; (on the remote control 2) to start playback.

Finding a passage within a track

1Press and hold down on PREV ¡1 or NEXT 2™.

–The CD is played at high speed and low volume.

2When you recognize the passage you want, release PREV ¡1 or NEXT 2™.

–Normal playback continues.

Note: During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within the same track.

1To select your play mode, press the SHUFFLE or REPEAT button before or during playback until the display shows the desired function.

2Press PLAY•PAUSE 2; (on the remote control 2) to start playback if in the STOP position.

™If you have selected SHUFFLE, playback starts automatically.

3To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/

REPEAT modes are no longer displayed.

– You can also press STOP 9 to cancel your play mode.

Programming track numbers

Program in the STOP position to select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory.

1Press PROGRAM on the set or remote control to enter the programming mode.

™A track number is shown and PROGRAM flashes.

2Use the PREV ¡1 or NEXT 2™ on the set, (on the remote control ¡ or ™) to select your desired track number.

3Press PROGRAM to confirm the track number to be stored.

™The number of tracks programmed and total playing time of the program is shown briefly, then the selected track and PROG.

4Repeat steps 2-3to select and store all desired tracks.

™FULL is displayed if you attempt to program more than 20 tracks.

12