Liebert XDP160RM Mechanical Considerations, Positioning the Liebert XDP, Liebert XDP dimensions

Installation

2.0INSTALLATION

2.1Mechanical Considerations

2.1.1Positioning the Liebert XDP

Install the Liebert XDP according to the site specific documentation and secure the unit to the floor.

The Liebert XDP can be installed near a wall or another Liebert XDP. However, there must be at least 3 feet (92cm) clearance in front of the Liebert XDP as service access for components in the unit.

For additional technical information, refer to the System Design and Configuration Document for the Liebert XD™ System, SL-16655. The document is available in electronic format at Liebert’s Web site, www.liebert.com, as well as from your local Emerson representative.

Figure 7 Dimensions

A B

Overall Overall

C

Side Panel

F	E	D
Height
	5"
of Unit
	(127mm)
	1" (25mm)
	2-3/8"
	(60mm)

D

Unit Base

E

Unit Base

11"

(279mm)

Floor Cutout Dimensions

The shaded area indicates a recommended clearance of 36" (914mm) for component

Unit Dimensional Data

Table 2 Liebert XDP dimensions

access.

DPN001598 Pg. 2, Rev. 7

Model		Dimensional Data, inches (mm)					Shipping Weight, lb. (kg)
50/60Hz	A	B*	C	D	E	H	Domestic	Export
XDP160	38 (965)	34 (864)	33-1/8 (841)	33 (838)	36 (914)	78 (1981)	1020(462)	1083 (491)

* The dimension does not include the bezel of the disconnect switch.

9