Liebherr CS1660 manuel dutilisation Repositioning the shelves Figure, Removing the shelves Figure

Refrigerator Compartment

Repositioning the shelves - Figure 15

1.Hold the shelf underneath with your hand to avoid from tipping down backwards when removing.

2.Lift the shelf at the front.

3.Remove the shelf forward until the circular cutout of the shelf is in line with the interior light cover.

4.Lift the shelf up or down and replace in the desired position.

Interior lightcover

Figure 15

If you need space for large bottles and con- tainers.

Place the shelf rails provided on the sup- ports on the left and right at the desired height - Figure 17.

Insert the glass shelves
as shown in fig. 18.
The glass shelf with the	Figure 17
raised edge must go at
the back.
If you need to make
space for tall contain-
ers, simply slide the
front half of the sec-
tioned glass shelf care-
fully underneath the
back half - Figure 18.	Figure 18

Removing the shelves - Figure 16

1.Follow the first three steps in the chapter above.

2.Lift the shelf down and stop just over the upper vegetable bin.

3.Move the front of the shelf upwards until the shelf is in a vertical position.

4.Turn the shelf counterclockwise and remove.

To avoid it falling down, always hold the shelf with both hands when removing.

Figure 16

To remove the vegetable drawer

Pull the drawer straight out, grip at the back and lift out - Figure 19.

To install the vegetable drawer

Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.

Figure 19

17