Aiwa XR-M1000 manual PLAY/PAUSE 4PLAY

Load discs.

To Dlav all discs	in	the disc	compartme~,		press
-11 PLAY/PAUSE	(or	4>PLAY	on the	remote	control).
Play begins with the disc on tray 1.
Playing disc number			Elapsed	playing	time
!			I

1

Number of track being played

To rdav one disc oni~ press DISC DIRECT PLAY 1-3.

The selected disc is played once.

Selected disc number Elapsed playing time

Number of track being played

●When the selected button is pressed once more, all the

discs in the disc compartment are played once continuously.

TO begin play with the remote control

Press DISC DIRECT PLAY, then press numbered buttons 1-3 within 3 seconds to select a disc.

To stop play, press ■ STOP (or ■ CLEAR on tlhe remote

control).

To pause play, press 01 I PLAYIPAUSE (or II SET on the remote control), To resume play, press again.

To search for a particular point during playback, keep ●+

or _ pressed and release it at the desired point.

To skip to the beginning of a track during playback, press

44 or - repeatedly.

To remove discs, press A OPEN/CLOSE.

To start play when the power is off (Direct Play Function) Press CD on the stereo receiver. The power is turned on and play of the loaded disc(s) begins.

When A OPEN/CLOSE or DISC CHANGE is pressecl, the power is also turned on and the disc compartment is opened.

To check the remaining time

During play, press EDIT/CHECK on the remote control. The amount of time remaining until all tracks of the disc finish playing is displayed. To restore the playing time display, repeat the above.

Selecting a track with the remote control

1 Press DISC DIRECT PLAY, then press numbered buttons 1-3 within 3 seconds to select a disc.

2Press numbered buttons O-9 and +1O to select a track. Example:

To select the 25th track, press +10, +10 and 5. To select the 10th track, press +1 O and 0.

The selected track starts to play and continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.

1 Press DISC CHANGE.

2Remove the discs and replace with other discs.

3Press A OPEN/CLOSE to close the disc compartment.

m

●When loading an 8-cm (3-inch) disc, put it onto the inner circle

of	the	tray.	,,’,.,
● Do	not	place more than one compact disc on one disc tray.	j;,- *~

●Do not tilt the unit with discs loaded. Doing so may cause #3’--.%8

malfunctions. $@

●Do not use irregular shape CDs (example: heart-shaped, E###k ~B~

octagonal ones). It may result in malfunctions.

‘v

Use the remote control

RANDOM play

All the tracks on the selected disc or all the discs can be played randomly.

REPEAT play

A single disc or all the discs can be played repeatedly.

Press RANDOM/REPEAT on the remote control.

Each time it is pressed, the function can be selected cyclically. RANDOM play — “RANDOM” is highlighted on the display. REPEAT play — “REPEAT” is highlighted on the display.

RANDOM/REPEAT play — “RANDOM” and “REPEAT” are highlighted on the display.

Cancel — The highlighted indicators ‘(RANDOM” and “REPEAT” disappear from the display.

TQK&av all discs, press <FPLAY (or Pll PLAY/PAUSE on the C[) player) to start play.

To Dlav a sinale disc, press DISC DIRECT PLAY and press numbered buttons 1-3 within 3 seconds (or DISC DIRECT PLAY 1-3 on the CD player) to select a disc.

During random play it is not possible to skip to the previously played track with +.

ENGLISH 21